dochall22

iTrader: (6)

Will this work? Somone told me that a corvette transmission would have different bolt holes? I dunno... knew to the stick stuff - will it need anything special to work?

1999 C5 going in a 2001 SS

78novacaine

iTrader: (2)

i know for sure that the shifter is mounted differently, being as how the c5 transmission is not bolted directly to the engine

dochall22

iTrader: (6)

whatta ya mean? so different bellhousing or something?

Black02SLPSS

iTrader: (5)

The C5 t56 wont work. It is mounted to the rear transaxle and the front of the transmission it mounted to a torque tube. The cases are different from each other.

Hugger Z

iTrader: (4)

The C5 trans is mounted to the rear differential and connected to the engine/bellhousing by a torque tube. So yes they are different. I am not sure if the bolt holes would still line up on the C5 trans and a F-body bellhousing.

01CamaroZ28

iTrader: (9)

Yep its different. I dont think you can make it work. I think they call the vettes a "floating" transmission if I'm not mistaken

thesource

iTrader: (60)

This has been covered several times . Do a search on it and you will find all the info you need to describe why it will not work .

85MikeTPI

iTrader: (9)

The internals could be put into an LS1 T56 with some extra $$, but yeah, the C5s don't sell for much because they only fit on a C5 transaxle drivetrain.