Weber Racing Equipment Shortblock sale!! All Precision Turbo and Acceleronics on sale
#1
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know we are new here, so I will give you guys a little background. We are Weber Racing Equipment. Weber Racing was established in 1968, giving us over 35 years of engine building and racing experience.
The Weber Racing Equipment Dragster consists of a 465 CI Allen Johnson Block and Heads (Based on a BBC), that spins over 10,000 RPM, 60 pounds of boost is delivered via a PSI Twin Screw
All 2500+ HP is rowed through a Lenko 3 Speed!!!!! Oh yea..........it runs 5.50 @ 255 MPH
We have been one of the premier engine builders for some of the worlds fastest Turbo Buick V6's for many years. We even pioneered the Billet Hyd. Roller cam for Buick's and are the only company that sells hydraulic rollers that do not require engine block modification for installation. If you would like, please feel free to do a search on Turbobuick.com (or any other buick V6 message board you can think of) to see the reviews we have received in the Buick community.
WRE 370 CI Stage 1 Short Block : $2850
New 6.0L GM Iron Block
Polished GM 6.0L Crankshaft
K1 Technologies 4340 H-Beam Connecting Rods (K1 is a subsidiary of Carrillo)
Wiseco -25CC Turbo Duty Pistons or -2.2cc Nitrous compatible pistons w/ Wiseco std. tension rings
Coated Durabond Cam, Main and Rod Bearings
Engine will be:
Even though these are new blocks, we have seen many imperfections. Especially in the deck, not giving a perfect head mating surface. We have seen factory blocks off by as much as .009. This makes the square deck and line hone crucial to component functionality and longevity.
WRE 408 CI Stage 1 Short Block : $3450
Same features at the 370 CI engine listed above with the exception of:
K1 Technologies 4340 Forged 4.000 Stroker crankshaft
Wiseco -32cc Stroker Turbo Duty or -8cc Nitrous compatible pistons
Both engine packages can be tailored to fit your needs please inquire with any questions you may have.
We are also extending this sale to all engine upgrades:
Weber Racing Equipment is also an authorized dealer Acceleronics impedance converter boxes.
For those of you not familiar on what an impedance converter does. It is simply a box that splices in your wiring harness between your injectors and your engine computer. This gives you the ability to run the big, low impedance injectors on your factory computer and eliminates the need for expensive stand alone engine controllers.
We are offering the Acceleronics Boxes at a sale price of $375. This includes shipping anywhere in the continental united states.
We are also offering discounted pricing on all Precision Turbo and Engine products. Anything from injectors, wastegates, to big thumpers it is all on sale.
For special pricing, custom work or any questions you may have please post it up, shoot a PM, Send an email or give us a call at 440-327-7702.
The Weber Racing Equipment Dragster consists of a 465 CI Allen Johnson Block and Heads (Based on a BBC), that spins over 10,000 RPM, 60 pounds of boost is delivered via a PSI Twin Screw
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
We have been one of the premier engine builders for some of the worlds fastest Turbo Buick V6's for many years. We even pioneered the Billet Hyd. Roller cam for Buick's and are the only company that sells hydraulic rollers that do not require engine block modification for installation. If you would like, please feel free to do a search on Turbobuick.com (or any other buick V6 message board you can think of) to see the reviews we have received in the Buick community.
WRE 370 CI Stage 1 Short Block : $2850
New 6.0L GM Iron Block
Polished GM 6.0L Crankshaft
K1 Technologies 4340 H-Beam Connecting Rods (K1 is a subsidiary of Carrillo)
Wiseco -25CC Turbo Duty Pistons or -2.2cc Nitrous compatible pistons w/ Wiseco std. tension rings
Coated Durabond Cam, Main and Rod Bearings
Engine will be:
- CNC Bored and Honed with torque plate for a precision ring finish
- Align honed
- CNC Square Decked
- All main caps deburred
- Jet washed prior to assembly
- Blueprinted and Balanced (Tolerance sheet provided with every engine we
assemble) - Assembled in our clean, dedicated, engine assembly room.
Even though these are new blocks, we have seen many imperfections. Especially in the deck, not giving a perfect head mating surface. We have seen factory blocks off by as much as .009. This makes the square deck and line hone crucial to component functionality and longevity.
WRE 408 CI Stage 1 Short Block : $3450
Same features at the 370 CI engine listed above with the exception of:
K1 Technologies 4340 Forged 4.000 Stroker crankshaft
Wiseco -32cc Stroker Turbo Duty or -8cc Nitrous compatible pistons
Both engine packages can be tailored to fit your needs please inquire with any questions you may have.
We are also extending this sale to all engine upgrades:
- ARP Main and head studs
- Piston Coating
- Custom pistons
- Pin upgrades
- Upgraded crankshafts by Callies
- LS2 Aluminum Block upgrade
- Cylinder head O-Ringing is available
- Main Cap Dowels also available
- Special pricing on all gasket kits, valve train and cylinder heads.
Weber Racing Equipment is also an authorized dealer Acceleronics impedance converter boxes.
For those of you not familiar on what an impedance converter does. It is simply a box that splices in your wiring harness between your injectors and your engine computer. This gives you the ability to run the big, low impedance injectors on your factory computer and eliminates the need for expensive stand alone engine controllers.
We are offering the Acceleronics Boxes at a sale price of $375. This includes shipping anywhere in the continental united states.
We are also offering discounted pricing on all Precision Turbo and Engine products. Anything from injectors, wastegates, to big thumpers it is all on sale.
For special pricing, custom work or any questions you may have please post it up, shoot a PM, Send an email or give us a call at 440-327-7702.
For those who need engine or any other accessory installed we do offer full installation and tuning services!!!!
#2
10 Second Club
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just sent you an enquiry. Please read and email me back. My engine is sitting on a stand in my garage. I'm ready to send my block to an engine builder for a rebuild...or just purchase a whole new block. I have already missed a lot of drag racing this season so of course I am looking for a quick delivery.
#6
12 Second Club
iTrader: (1)
Join Date: Jan 2006
Location: Abq
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You didn't mention the Mallet cars you guys worked on either! All I have to say is this a class act shop and the CNC Machine is pretty! Not to mention they have the cleanest machine shop I have been in to date!! I will let you know when I am ready for my clutch master and slave cylinders and QA-1s!!!
Trending Topics
#14
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is the last week everyone!!
Check out how one of our board members is doing with one of our shortblocks here: https://ls1tech.com/forums/nitrous-oxide/732862-shakedown-passes-weber-racing-403ci-ls2.html
Check out how one of our board members is doing with one of our shortblocks here: https://ls1tech.com/forums/nitrous-oxide/732862-shakedown-passes-weber-racing-403ci-ls2.html
#15
Banned
Thread Starter
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
TTT Only 2 days left!!!!
Since we are closed on Saturday, and you want to call that day to order and engine shoot me an email and/or leave a message on the machine and I will honor the pricing on it for you on Monday. I will honor the sale price if you get ahold of me on Monday the 2nd of July since the month is ending on a day that we are closed!!!!
Since we are closed on Saturday, and you want to call that day to order and engine shoot me an email and/or leave a message on the machine and I will honor the pricing on it for you on Monday. I will honor the sale price if you get ahold of me on Monday the 2nd of July since the month is ending on a day that we are closed!!!!