Indy People....check-in and say hi!
05-01-2010, 04:19 PM
#5281
10 Second Club
Thread Starter
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
Got in some WOT PEWLZ Last Night... 
Well I finally got a front end allignment on the car and also put the True Duals back on the car.
I was tired of the SLP LM1. 
Needless to say, I went out last night "cruising around with some buddies" and got into a lil heads up competition.
Check it out!
*All races were done on Mexican Highways!
And Slayer, If you can't find a place to pull it, lmk!
I got a garage we can do it in! Just have to push it back outside at night so I can pull my cars back in if we don't get it done in 1 day! lmk!
First race was 50-130 and the camera cut off...GF Accidentally hit the button. lol
Vette on left, Me in the middle, and the Viper on the right...
View Video on FQuick
Second race was 50-130 and I was on the right. Viper in the middle and a H/C Vette in the Far Left Lane.
View Video on FQuick
http://s165.photobucket.com/albums/u...t=IMG_0107.flv
Well I finally got a front end allignment on the car and also put the True Duals back on the car.
I was tired of the SLP LM1. Needless to say, I went out last night "cruising around with some buddies" and got into a lil heads up competition.
Check it out!
*All races were done on Mexican Highways!
And Slayer, If you can't find a place to pull it, lmk!
I got a garage we can do it in! Just have to push it back outside at night so I can pull my cars back in if we don't get it done in 1 day! lmk!
First race was 50-130 and the camera cut off...GF Accidentally hit the button. lol
Vette on left, Me in the middle, and the Viper on the right...
View Video on FQuickSecond race was 50-130 and I was on the right. Viper in the middle and a H/C Vette in the Far Left Lane.
View Video on FQuickhttp://s165.photobucket.com/albums/u...t=IMG_0107.flv
Last edited by LT1Formula007; 05-02-2010 at 12:03 AM.
05-01-2010, 05:44 PM
#5284
Teching In
Join Date: Aug 2009
Location: Indy 500
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Looks like hocky came in third, bet he wishes he kept that LS6 Rx7 now.
Nice kill and that thing is a monster now
315 on 9 yep, it is a nitto they run small. I ran 275 nitto on a 8" rim. Its just a track tire anyways so it only going to have about 18lbs of air.
Nice kill and that thing is a monster now
315 on 9 yep, it is a nitto they run small. I ran 275 nitto on a 8" rim. Its just a track tire anyways so it only going to have about 18lbs of air.
05-01-2010, 08:10 PM
#5286
10 Second Club
Thread Starter
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
If not, I may be able to find someone with a trailer if you cover gas...
Thanks man!!!
Yeah it runs pretty good IMO.
Just hope it sticks at the track this year. I want to launch the $hit out of it this year, But IDK how it will leave with the current suspension! We'll see what happens!
Yeah it runs pretty good IMO.
Just hope it sticks at the track this year. I want to launch the $hit out of it this year, But IDK how it will leave with the current suspension! We'll see what happens!
05-01-2010, 09:10 PM
#5288
10 Second Club
Thread Starter
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
It's cool man. I don't mind helping people out.
I got all the tools we need and a tranny jack so it's all good!
Just lmk when you wanna do it and I'll figure out when I'm available.
ttyl bro!
James
I got all the tools we need and a tranny jack so it's all good!
Just lmk when you wanna do it and I'll figure out when I'm available.
ttyl bro!
James
05-01-2010, 09:58 PM
#5289
11 Second Club
Join Date: May 2004
Location: Ky
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Way to represent the LS Community. But be easy on the Vette's. lol Would rather see Digs!
Remember guys I have a 9 inch Moser housing and 33 spline axles for 88 F body. Also has torque arm bracket $700 and I will not ship! They tell me newer cars like this width for those cars. Is that true??
Remember guys I have a 9 inch Moser housing and 33 spline axles for 88 F body. Also has torque arm bracket $700 and I will not ship! They tell me newer cars like this width for those cars. Is that true??
05-02-2010, 12:00 AM
#5292
10 Second Club
Thread Starter
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
Way to represent the LS Community. But be easy on the Vette's. lol Would rather see Digs!
Remember guys I have a 9 inch Moser housing and 33 spline axles for 88 F body. Also has torque arm bracket $700 and I will not ship! They tell me newer cars like this width for those cars. Is that true??
Remember guys I have a 9 inch Moser housing and 33 spline axles for 88 F body. Also has torque arm bracket $700 and I will not ship! They tell me newer cars like this width for those cars. Is that true??
I prefer DIGS as well, But seeing as how I had 18" Street Tires on, It would not have been very good for me.
Those cars BOTH run Strong though.
I had a blast man!
Also, Yes the 3rd gen rearend length is shorter by 1.5" on each side. And they are more desired for racing applications b/c they reduce weight, rotating mass, and also allow you to run a deep dish wheel that looks killer but mainly allows the weight to be more evenly disbursted throughout the wheel. Rather than having 7.5" of backspacing on a 10" wheel, you now need 5" or 6" of back spacing! Making the wheel less prone to warp, break, or be damaged in any way.
700 is a good deal BTW!
James
05-02-2010, 12:30 AM
#5294
11 Second Club
Join Date: May 2004
Location: Ky
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
05-02-2010, 01:05 AM
#5296
10 Second Club
Thread Starter
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
It takes money to play with the BIG Boyz...
Hope you can make the shootout man!
It will be my 1st year there!
05-03-2010, 10:11 AM
#5297
05-03-2010, 08:53 PM
#5298
TECH Fanatic
iTrader: (1)
Join Date: Oct 2007
Location: Greenwood, Indiana
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
Got in some WOT PEWLZ Last Night...
Well I finally got a front end allignment on the car and also put the True Duals back on the car. I was tired of the SLP LM1.
Needless to say, I went out last night "cruising around with some buddies" and got into a lil heads up competition.
Check it out!
*All races were done on Mexican Highways!
And Slayer, If you can't find a place to pull it, lmk!
I got a garage we can do it in! Just have to push it back outside at night so I can pull my cars back in if we don't get it done in 1 day! lmk!
First race was 50-130 and the camera cut off...GF Accidentally hit the button. lol
Vette on left, Me in the middle, and the Viper on the right...
View Video on FQuick
Second race was 50-130 and I was on the right. Viper in the middle and a H/C Vette in the Far Left Lane.
View Video on FQuick
http://s165.photobucket.com/albums/u...t=IMG_0107.flv
Well I finally got a front end allignment on the car and also put the True Duals back on the car.
I was tired of the SLP LM1. Needless to say, I went out last night "cruising around with some buddies" and got into a lil heads up competition.
Check it out!
*All races were done on Mexican Highways!
And Slayer, If you can't find a place to pull it, lmk!
I got a garage we can do it in! Just have to push it back outside at night so I can pull my cars back in if we don't get it done in 1 day! lmk!
First race was 50-130 and the camera cut off...GF Accidentally hit the button. lol
Vette on left, Me in the middle, and the Viper on the right...
View Video on FQuickSecond race was 50-130 and I was on the right. Viper in the middle and a H/C Vette in the Far Left Lane.
View Video on FQuickhttp://s165.photobucket.com/albums/u...t=IMG_0107.flv
good kills man car is runnin strong
05-04-2010, 01:57 PM
#5300
10 Second Club
Thread Starter
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
we hang out every weekend on 31 when it's nice out.
I'm trying to have a meet on 5-22-10.
I have a thread in this section. lmk if you can make it.
If we get enough, I'll have the meet.
James
I'm trying to have a meet on 5-22-10.
I have a thread in this section. lmk if you can make it.
If we get enough, I'll have the meet.
James
Last edited by LT1Formula007; 05-04-2010 at 06:29 PM.