? about egr mod
#2
TECH Enthusiast
iTrader: (13)
Joined: Feb 2007
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
From: near rockford
Most guys remove it completely as its not that hard to take off at all. You will either have to get an ls6intake or you can plug the hole on your manifold but if you do headers or anything you can either keep it or get a race style header and it will have to be pulled off anyways. If you have no emissions either wait until you get headers or just pull it off it really doesnt matter either way
#5
TECH Enthusiast
iTrader: (13)
Joined: Feb 2007
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
From: near rockford
I cant remember the exact size but its just a freeze plug you can get at any hardware store. Im sure someone knows the exact size but I cant remember you can try a search and type in freeze plug and you will find out the size.
Trending Topics
#9
Staging Lane
iTrader: (8)
Joined: Apr 2005
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
From: Ft. Riley, KS
I think it's about 1" in diameter. Not sure though, I took my peice from a friend.
I've got a thick peice of rubber with washers on both ends. When you put it all together and tighten the bolt down it makes the rubber expand and smashes itself in there.
I've got a thick peice of rubber with washers on both ends. When you put it all together and tighten the bolt down it makes the rubber expand and smashes itself in there.