Another Hall's deal!!!
#7702
Teching In
iTrader: (1)
Join Date: Apr 2008
Location: Manureville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
The 9" or 8.8" is what I was thinking of doing. From what I understand the 8.8 actually bolts in the stock location on a s-10, but the housing it self is longer. I would think that would help in making a easier install. I was just asking about the 10 bolt because I plan on running that for this coming season.
An 8.8 is lighter than a 9'' by quite a few lbs. I have heard that the 9'' is more efficent with power transfer under higher horsepower levels. If you decide to go with an 8.8, let me know. I can get you some killer deals thru my contact at Ford Racing. Also, i have a line on an aluminum 9'' its a trussed unit that i was thinking about dropping in the stang. It was used by Lambert Racing out in Columbia City, but from what i understand is in good condition. (Dirt track rear end).
You may be able to work out a deal with Jared Davis about an independent rear axle assembly with an 8,8 center section. I heard that he is wanting to go SRA. An IRS would be killer SICK! Also since you dont track it every week, it would handle like its on rails. One other thing on Fords, you can Bolt in an SRA or go with an IRS, they are totally interchangeable and all bolt up the same. If the 8.8 SRA fits in and s-10, possibly the irs will as well.
#7703
Teching In
iTrader: (1)
Join Date: Apr 2008
Location: Manureville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I talked with Mark Poysner at work last week. He said that the alcohol funny car is on hold right now and that they might close up the Halter Pool table business. If anybody is needing any game supplies or fooseball tables or pool sticks. Get out and see them. They are great people and are worth helping out.
#7704
12 Second Club
iTrader: (1)
Join Date: Apr 2007
Location: Ft. Wayne, IN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
There are alot of 800hp stangs sporting a stock 8,8 rear end. Trouble areas are spinning the axle tubes, just weld them up. Also get a rear end girdle. you stud the diff cover and preload with studs and locknuts the diff carrier bearings. One other thing, Make sure that you are running minumum 31 spline axles. A Stock 0304 Cobra locker will work great, Make sure that you get the carbon fiber clutches. BTW those are totally rebuildable. You can also tighten them up by changing how you add the steel plates and clutches.
An 8.8 is lighter than a 9'' by quite a few lbs. I have heard that the 9'' is more efficent with power transfer under higher horsepower levels. If you decide to go with an 8.8, let me know. I can get you some killer deals thru my contact at Ford Racing. Also, i have a line on an aluminum 9'' its a trussed unit that i was thinking about dropping in the stang. It was used by Lambert Racing out in Columbia City, but from what i understand is in good condition. (Dirt track rear end).
You may be able to work out a deal with Jared Davis about an independent rear axle assembly with an 8,8 center section. I heard that he is wanting to go SRA. An IRS would be killer SICK! Also since you dont track it every week, it would handle like its on rails. One other thing on Fords, you can Bolt in an SRA or go with an IRS, they are totally interchangeable and all bolt up the same. If the 8.8 SRA fits in and s-10, possibly the irs will as well.
An 8.8 is lighter than a 9'' by quite a few lbs. I have heard that the 9'' is more efficent with power transfer under higher horsepower levels. If you decide to go with an 8.8, let me know. I can get you some killer deals thru my contact at Ford Racing. Also, i have a line on an aluminum 9'' its a trussed unit that i was thinking about dropping in the stang. It was used by Lambert Racing out in Columbia City, but from what i understand is in good condition. (Dirt track rear end).
You may be able to work out a deal with Jared Davis about an independent rear axle assembly with an 8,8 center section. I heard that he is wanting to go SRA. An IRS would be killer SICK! Also since you dont track it every week, it would handle like its on rails. One other thing on Fords, you can Bolt in an SRA or go with an IRS, they are totally interchangeable and all bolt up the same. If the 8.8 SRA fits in and s-10, possibly the irs will as well.
#7705
I have to leave very early on Sunday the 4th to head back to OTS. Its a good 10.5 hour drive and I am sure to have an un-friendly greeting when I return (as we were informed when we left for the break). The last thing I would need is to set myself behind the power curve at the start of that painfull day by not getting a full nights sleep ect.
We will have to setup to hang out on Friday night. I'm still thinking dinner somewhere not too fancy, and then whatever afterwards. Maybe a movie or playing some video games somewhere or something.
We will have to setup to hang out on Friday night. I'm still thinking dinner somewhere not too fancy, and then whatever afterwards. Maybe a movie or playing some video games somewhere or something.
#7706
I talked with Mark Poysner at work last week. He said that the alcohol funny car is on hold right now and that they might close up the Halter Pool table business. If anybody is needing any game supplies or fooseball tables or pool sticks. Get out and see them. They are great people and are worth helping out.
#7707
10 Second Club
iTrader: (2)
Join Date: Sep 2006
Location: Fort Wayne, IN
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
What's the average price for a good pool table? I've thought about buying one when I get a house because I probably won't be able to fill up the whole house with just my stuff. And matter as well make one a game room with a big screen tv in it too!
#7710
Teching In
Join Date: Jan 2008
Location: Fort Wayne I.N.
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Ya its sad to hear that I'v know the family all my life. I grew up over there and it was my first job. Del showed me alot with cars i did my first burn out in his camero LOL
#7711
Thanks man. It may come to that if we if theres enough people with nothing going on after dinner.
Thanks Joe. I'll give Nasty a call. I don't have Switches number though. By now he is probably asleep and will be on the road early in the morning heading our way. But if I talk to him before he arrives, I'll let him know he's got email.
? WTF does probably maybe mean?
Sorry I got locked up in a lot of family stuff that took foreever and was still unsure about that night. This friday I will be in Arkansas driving back 10 -12 hours depending on traffic. I can prob do something on Saturday. sorry.
.
Thanks Joe. I'll give Nasty a call. I don't have Switches number though. By now he is probably asleep and will be on the road early in the morning heading our way. But if I talk to him before he arrives, I'll let him know he's got email.
? WTF does probably maybe mean?
Sorry I got locked up in a lot of family stuff that took foreever and was still unsure about that night. This friday I will be in Arkansas driving back 10 -12 hours depending on traffic. I can prob do something on Saturday. sorry.
.
Where can I find Halter?
#7712
LS1TECH Sponsor
iTrader: (13)
Join Date: Mar 2005
Location: Indiana
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Also, I should be able to make it out Friday for dinner. It'd be good to see you crazy bastards.
#7714
TECH Fanatic
iTrader: (24)
Any idea when I might be able to snag that sumped tank from you? I think I'm ready to final the fuel system in my car.
Also, I have your Dad's 3/8 NPT tap. I had it sitting in a nice little box so I wouldn't forget it when I brought your welder back, and, guess what, it's still sitting in a nice little box. I'll bring it by when I get the tank.
Oh, and he's picking up rockers/steering rack/crank from my house (wanna get that tranny too Nick?), I hadn't thought about the fuel system, since it needs rebuilt for his tank, but he'll still owe you for a pump.
Danke!
#7716
LS1TECH Sponsor
iTrader: (13)
Join Date: Mar 2005
Location: Indiana
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Drew,
Any idea when I might be able to snag that sumped tank from you? I think I'm ready to final the fuel system in my car.
Also, I have your Dad's 3/8 NPT tap. I had it sitting in a nice little box so I wouldn't forget it when I brought your welder back, and, guess what, it's still sitting in a nice little box. I'll bring it by when I get the tank.
Oh, and he's picking up rockers/steering rack/crank from my house (wanna get that tranny too Nick?), I hadn't thought about the fuel system, since it needs rebuilt for his tank, but he'll still owe you for a pump.
Danke!
Any idea when I might be able to snag that sumped tank from you? I think I'm ready to final the fuel system in my car.
Also, I have your Dad's 3/8 NPT tap. I had it sitting in a nice little box so I wouldn't forget it when I brought your welder back, and, guess what, it's still sitting in a nice little box. I'll bring it by when I get the tank.
Oh, and he's picking up rockers/steering rack/crank from my house (wanna get that tranny too Nick?), I hadn't thought about the fuel system, since it needs rebuilt for his tank, but he'll still owe you for a pump.
Danke!
Sounds like a plan man, I bet he doesn't even remember that he loaned you that tap. BTW....do you still have that L67 block? I mayyyyyy try to snag that...I have an idea.
#7717
TECH Fanatic
iTrader: (24)
Yes, we'll sump my tank over the summer. That will give me time to vent it and clean out the gas so it doesn't explode when it gets welded on.
And, yes I still have that L67 block. Come get it, please, god, come get it. I'm trying to get all my old crap out of the garage!
And, yes I still have that L67 block. Come get it, please, god, come get it. I'm trying to get all my old crap out of the garage!
#7719
Teching In
iTrader: (1)
Join Date: Apr 2008
Location: Manureville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Any big new years partys going on? The party i was going to attend was or is being cancelled. The husband and wife both got mersa. its some sort of staph infection that is resistant to common drugs. Apparently the wife first got it from a outpatient surgery, ( dont know if the operating room wasnt decontaminated properly from a prior surgery) they had to bring her back in and cut a divot or chunk of meat out of her leg to keep the infection from spreading. A month later the husband got the infection and they cut a chunk of meat out of his chest below his armpit. I hear that its very contagious, and i am not looking at catching this crap!
#7720
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
Any big new years partys going on? The party i was going to attend was or is being cancelled. The husband and wife both got mersa. its some sort of staph infection that is resistant to common drugs. Apparently the wife first got it from a outpatient surgery, ( dont know if the operating room wasnt decontaminated properly from a prior surgery) they had to bring her back in and cut a divot or chunk of meat out of her leg to keep the infection from spreading. A month later the husband got the infection and they cut a chunk of meat out of his chest below his armpit. I hear that its very contagious, and i am not looking at catching this crap!