Another Hall's deal!!!
#7926
THE 4X4 LOOK IS STARTN TO WEAR on me that's for sure. I saw the Edlebrock shocks used on a couple cars in pictures but haven't talked to anybody to see how good they might be.
The IAS shocks are included in a kit from Edelbrock that has springs, shocks, lower trailing arms, Pn HARD rod, TQ arm. This was a quick solution to my 4x4 problem that I've been looking into. It comes with Pro touring springs, supposed to lower it an inch to inch 1/2. The more and more I think about it though I want air ride. Every lowered car I rode in sucked for clearing anything in Indiana, and I have a lot of pot holes out by me.
You know I don't brush my teeth
The IAS shocks are included in a kit from Edelbrock that has springs, shocks, lower trailing arms, Pn HARD rod, TQ arm. This was a quick solution to my 4x4 problem that I've been looking into. It comes with Pro touring springs, supposed to lower it an inch to inch 1/2. The more and more I think about it though I want air ride. Every lowered car I rode in sucked for clearing anything in Indiana, and I have a lot of pot holes out by me.
You know I don't brush my teeth
#7927
ttttttteesssssssssstttt
this is only a test!!!!
**** I didn't know it would go back and change your sig in all your posts! I've never changed mine until now.
**** I didn't know it would go back and change your sig in all your posts! I've never changed mine until now.
Last edited by terry02; 01-07-2009 at 06:29 PM. Reason: I DIDN'T KNOW
#7928
10 Second Club
iTrader: (2)
Join Date: Sep 2006
Location: Fort Wayne, IN
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Well I just got home and I took some pics of it about 50 actually! They had it in the back where people bring in their cars to get serviced, but they let me take pictures of it! And I don't think they are going to wash it and it is a little dirty right now! So we will have to see if it will be in the showroom since they might not wash it. I asked one of the guys that works their and the owner is Larry Gary who owns the Erie Cement Company in New Haven.
I'll post the pics up tonight but it might take me awhile!
I'll post the pics up tonight but it might take me awhile!
#7929
Well I just got home and I took some pics of it about 50 actually! They had it in the back where people bring in their cars to get serviced, but they let me take pictures of it! And I don't think they are going to wash it and it is a little dirty right now! So we will have to see if it will be in the showroom since they might not wash it. I asked one of the guys that works their and the owner is Larry Gary who owns the Erie Cement Company in New Haven.
I'll post the pics up tonight but it might take me awhile!
I'll post the pics up tonight but it might take me awhile!
LOL yeah I heard they are waitin on a towl they ordered in to wash it with lol
#7931
Well I just got home and I took some pics of it about 50 actually! They had it in the back where people bring in their cars to get serviced, but they let me take pictures of it! And I don't think they are going to wash it and it is a little dirty right now! So we will have to see if it will be in the showroom since they might not wash it. I asked one of the guys that works their and the owner is Larry Gary who owns the Erie Cement Company in New Haven.
I'll post the pics up tonight but it might take me awhile!
I'll post the pics up tonight but it might take me awhile!
Yeah it's woven from Chuck Norris's beard.
#7932
Teching In
Join Date: Mar 2007
Location: Fort Wayne/Ligonier
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Anyone who is looking for a deal on parts LG Motorsports has 50% off all their f-body parts. My brother and I each ordered a set of $195 LCAs for $195 total.
#7934
10 Second Club
iTrader: (2)
Join Date: Sep 2006
Location: Fort Wayne, IN
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Ok well here is the link to the pictures I took of the ZR1 everyone can start on LS1Tech!!!!
http://gs110.photobucket.com/groups/n88/CY5DQI780C/
http://gs110.photobucket.com/groups/n88/CY5DQI780C/
#7936
TECH Fanatic
iTrader: (24)
Ok well here is the link to the pictures I took of the ZR1 everyone can start on LS1Tech!!!!
http://gs110.photobucket.com/groups/n88/CY5DQI780C/
http://gs110.photobucket.com/groups/n88/CY5DQI780C/
#7937
TECH Apprentice
iTrader: (16)
Join Date: Feb 2008
Location: Fort Wayne, IN
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Get my stuff ordered?
Civic was lowered 2", didn't have a single issue with bottoming out or rubbibg or anything
Do you know if those rocker arms you gave me came off a gen III or gen IV motor?
THE 4X4 LOOK IS STARTN TO WEAR on me that's for sure. I saw the Edlebrock shocks used on a couple cars in pictures but haven't talked to anybody to see how good they might be.
The IAS shocks are included in a kit from Edelbrock that has springs, shocks, lower trailing arms, Pn HARD rod, TQ arm. This was a quick solution to my 4x4 problem that I've been looking into. It comes with Pro touring springs, supposed to lower it an inch to inch 1/2. The more and more I think about it though I want air ride. Every lowered car I rode in sucked for clearing anything in Indiana, and I have a lot of pot holes out by me.
The IAS shocks are included in a kit from Edelbrock that has springs, shocks, lower trailing arms, Pn HARD rod, TQ arm. This was a quick solution to my 4x4 problem that I've been looking into. It comes with Pro touring springs, supposed to lower it an inch to inch 1/2. The more and more I think about it though I want air ride. Every lowered car I rode in sucked for clearing anything in Indiana, and I have a lot of pot holes out by me.
Do you know if those rocker arms you gave me came off a gen III or gen IV motor?
#7938
Teching In
iTrader: (1)
Join Date: Apr 2008
Location: Manureville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
ZR1 question, I had heard that you must have a special license to own this car. Or, you must take special drivers training. Any truth to that?????
Since you have had both, did you ever notice a clunking noise from your strange shocks/struts? I have tightned down all fasteners, and have figured that it must be in the valve body of the shock/strut. Its mostly noticeable when they are cold.
Ha ha, Nice one BEAVER!
Ha ha, Nice one BEAVER!
#7939
12 Second Club
iTrader: (1)
Join Date: Apr 2007
Location: Ft. Wayne, IN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Ok well here is the link to the pictures I took of the ZR1 everyone can start on LS1Tech!!!!
http://gs110.photobucket.com/groups/n88/CY5DQI780C/
http://gs110.photobucket.com/groups/n88/CY5DQI780C/