Another Hall's deal!!!
11-21-2011, 08:41 PM
TECH Apprentice
^^^ sure thing, bring it on over.
Heres some more welding i did for another guy with a turbo setup. If anyone needs any tig stuff done let me know, good price, fast turnaround.
^^^ was trying to show that the welds are backpurged and the inside looks like the outside, no sugar-ing, all smooth, but the pic is hard to tell
Heres some more welding i did for another guy with a turbo setup. If anyone needs any tig stuff done let me know, good price, fast turnaround.
^^^ was trying to show that the welds are backpurged and the inside looks like the outside, no sugar-ing, all smooth, but the pic is hard to tell
Last edited by silver_82; 11-21-2011 at 08:46 PM.
11-24-2011, 10:29 PM
10 Second Club
iTrader: (4)
Join Date: Mar 2006
Location: Fort Wayne, IN
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
From one welder to another. Nice work. Never done TIG, only SMAW and GMAW. Getting into pipe welding now that GM is combining the Millwright and Pipefitter trade. Should get into some stainless TIG in the future.
11-27-2011, 07:52 PM
12 Second Club
iTrader: (1)
Join Date: Apr 2007
Location: Ft. Wayne, IN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I have a few parts I am trying to get rid of if anyone knows somebody that needs them send'em my way.
-3" drop belltech s-10 leaf springs
-SBC Standard Rotation Edelbrock Water Pump
-March 6 rib water pump pulley
-Sumped S-10 gas tank
-TPI Professional Products 58mm Throttle Body
-Holley Systemax 2 SBC heads Ported by Al the guy that Joe sends everyone to. (These need some work) They also have better springs in them as well.
-3" drop belltech s-10 leaf springs
-SBC Standard Rotation Edelbrock Water Pump
-March 6 rib water pump pulley
-Sumped S-10 gas tank
-TPI Professional Products 58mm Throttle Body
-Holley Systemax 2 SBC heads Ported by Al the guy that Joe sends everyone to. (These need some work) They also have better springs in them as well.
12-01-2011, 08:07 AM
silver_82 Chris, when your not busy welding go pick yourself up a copy of Jan. FSC.
http://www.nmcadigital.com/fscmagazi...uary/#?page=52
http://www.nmcadigital.com/fscmagazi...uary/#?page=52
12-02-2011, 05:48 PM
TECH Apprentice
Thanks for the heads up but Ive got a subscription. Im in next months issue as well. Ive been in true street for a few years so ive been in the mag hear and there but that was my first "win"
hopefully next months issue has a better pic, the 1st pass i did was a pretty good wheelstand, maybe they caught it
http://www.youtube.com/watch?v=0IqcCMXrWsU
hopefully next months issue has a better pic, the 1st pass i did was a pretty good wheelstand, maybe they caught it
http://www.youtube.com/watch?v=0IqcCMXrWsU
12-09-2011, 01:24 PM
...okay, so its pretty much been a ghost town around here! Not that I can blame anyone as the snow is here, and not too much car stuff going on.
On a different note, I am deploying to the middle east in a few weeks, and I'd like to invite all of you to a little going away dinner. It will be at Quaker State restaurant on Coliseum Blvd this next Thursday at 7pm.
If you would like to come, please just let me know here so I know how many to expect.
On a different note, I am deploying to the middle east in a few weeks, and I'd like to invite all of you to a little going away dinner. It will be at Quaker State restaurant on Coliseum Blvd this next Thursday at 7pm.
If you would like to come, please just let me know here so I know how many to expect.
12-14-2011, 06:22 PM
get a forced air gas heater hung from the ceiling! I had my walls spray foamed and wrapped, and almost dont need a heater, but it is very nice to have. My garage almost never gets below 50 without the heater on, and never has gotten below 35 without the heater. Flip the switch and I have 1,100 sq ft heated in about 10 minutes to 70 degrees on the coldest days ever. Modine Hot Dawg furnace I think mine is the 75000 BTU one...worked great for past 10 years.
12-14-2011, 07:49 PM
11 Second Club
iTrader: (34)
Join Date: Feb 2005
Location: Ft. Wayne, Indiana
Posts: 3,158
Likes: 0
Received 0 Likes
on
0 Posts
get a forced air gas heater hung from the ceiling! I had my walls spray foamed and wrapped, and almost dont need a heater, but it is very nice to have. My garage almost never gets below 50 without the heater on, and never has gotten below 35 without the heater. Flip the switch and I have 1,100 sq ft heated in about 10 minutes to 70 degrees on the coldest days ever. Modine Hot Dawg furnace I think mine is the 75000 BTU one...worked great for past 10 years.
It does get toasty in there, I must say.
12-14-2011, 07:49 PM
11 Second Club
iTrader: (34)
Join Date: Feb 2005
Location: Ft. Wayne, Indiana
Posts: 3,158
Likes: 0
Received 0 Likes
on
0 Posts
12-14-2011, 10:16 PM
11 Second Club
Join Date: Jul 2007
Location: Hoagland, IN
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
get a forced air gas heater hung from the ceiling! I had my walls spray foamed and wrapped, and almost dont need a heater, but it is very nice to have. My garage almost never gets below 50 without the heater on, and never has gotten below 35 without the heater. Flip the switch and I have 1,100 sq ft heated in about 10 minutes to 70 degrees on the coldest days ever. Modine Hot Dawg furnace I think mine is the 75000 BTU one...worked great for past 10 years.
