Indy Friday night 9-26-08
#21
TECH Fanatic
iTrader: (24)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOL- Doug didnt fair to well friday night david.. blew out to exhaust manifold gaskets and he got scared of it b/c she started acting all funny and running REALLY rich lol.. but Jeff walked him pretty bad like 3 runs before the gaskets blew out..
we went and had some fun with jeff & doug & bob and like 30 other ppl lol... ( I smoked james' *** 2 out of 3, and 1 out of 3 i decided to leave it in OD and the dumdumdumdumdum just pulled my *** about 3/4 a car and then i started pullin back)
As for a cam for the LS1-
I think im still going to go with Trick Flow heads
and have Comp Cams make me a custom grind for my LS1 going off my cam spec's i had in my LT1
230/236@.050 Duration .555/.580@112LSA Figured on a 1.5 ratio rocker.(but if i figure the lift from the 1.5 ratio to the 1.7 it comes out to like 697 on exhaust - so thats really not going to work i dont think)
I think that should be a pretty nasty yet very streetable cam along with Trick Flow heads, supporting springs, lifters & pushrods, LS6 or FAST intake, throttle body, ported MAF,36/42lb injectors, Pacesetter LT's & ORY,magnaflow Catback, SLP lid,125 shot and a 3200 stall??
Opinions please anyone who OWNS an LS1....
we went and had some fun with jeff & doug & bob and like 30 other ppl lol... ( I smoked james' *** 2 out of 3, and 1 out of 3 i decided to leave it in OD and the dumdumdumdumdum just pulled my *** about 3/4 a car and then i started pullin back)
As for a cam for the LS1-
I think im still going to go with Trick Flow heads
and have Comp Cams make me a custom grind for my LS1 going off my cam spec's i had in my LT1
230/236@.050 Duration .555/.580@112LSA Figured on a 1.5 ratio rocker.(but if i figure the lift from the 1.5 ratio to the 1.7 it comes out to like 697 on exhaust - so thats really not going to work i dont think)
I think that should be a pretty nasty yet very streetable cam along with Trick Flow heads, supporting springs, lifters & pushrods, LS6 or FAST intake, throttle body, ported MAF,36/42lb injectors, Pacesetter LT's & ORY,magnaflow Catback, SLP lid,125 shot and a 3200 stall??
Opinions please anyone who OWNS an LS1....
well hell remember me? silver 98z from lincoln tech? anyways trick flows are badass, but god damn they cost a lot. You must use harlan sharp rocker when then, then you need valve cover spacers blah blah blah... fast intake with those heads or your wasting time. 42lb injectors. pacesetters are good, IDK about the 125 shot, cuz then your getting into need a racetronx pump hot wired with a voltage booster to hold fuel pressure... then your 4l60 will not be happy with anything much other than a stall lol... the list goes on forever lol.
I would just do bolt ons, stall exhaust, cam and a small shot and with the right parts it can go 10's when needed.
PM me if you need my number again.
Charlie
#22
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Jul 2006
Location: College Station,TX/Indy,IN
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well hell remember me? silver 98z from lincoln tech? anyways trick flows are badass, but god damn they cost a lot. You must use harlan sharp rocker when then, then you need valve cover spacers blah blah blah... fast intake with those heads or your wasting time. 42lb injectors. pacesetters are good, IDK about the 125 shot, cuz then your getting into need a racetronx pump hot wired with a voltage booster to hold fuel pressure... then your 4l60 will not be happy with anything much other than a stall lol... the list goes on forever lol.
I would just do bolt ons, stall exhaust, cam and a small shot and with the right parts it can go 10's when needed.
PM me if you need my number again.
Charlie
I would just do bolt ons, stall exhaust, cam and a small shot and with the right parts it can go 10's when needed.
PM me if you need my number again.
Charlie
I was planning on the racetronix fuel system, and probably buying a nice 4l60e...
#24
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Jul 2006
Location: College Station,TX/Indy,IN
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yes I know this purdueranger, that's why I'd have to have the rr figured into the lift of the cam if I had comp make me a grind off my old lt1 cam..
#27
TECH Addict
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Jeff, I would not trash talk that Viper to much, once he gets the bugs worked out and puts on the big boy pulley there will only be three people that will be able to touch him.
Remember that he is on super low boost and I wold be scared if I had a 80k car and 30k in mods..... I would hate to blow that up..
#29
TECH Addict
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Remember I am friends with the guy and on low boost he lost by like 2 cars to a 10 sec car.
I also know he is looking into different brakes to go with a drag wheel........
Doug is the knid of guy that will still race while trying to work the bugs out. The car is no turd, I know what it put down on low boost.
#30
10 Second Club
iTrader: (11)
Join Date: Apr 2006
Location: Indy, IN
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Who knows.
Jeff, I would not trash talk that Viper to much, once he gets the bugs worked out and puts on the big boy pulley there will only be three people that will be able to touch him.
Remember that he is on super low boost and I wold be scared if I had a 80k car and 30k in mods..... I would hate to blow that up..
Jeff, I would not trash talk that Viper to much, once he gets the bugs worked out and puts on the big boy pulley there will only be three people that will be able to touch him.
Remember that he is on super low boost and I wold be scared if I had a 80k car and 30k in mods..... I would hate to blow that up..
I bet there are more than 3 people around Indy that could run with a blown Viper.
#31
Launching!
iTrader: (10)
Join Date: Dec 2006
Location: Indy
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thats about the most ingorant post you can make. Just because YOU only know three cars that can beat him dosn't mean thats all there is in Indy. I would bet I can name atleast 10 that could show him taillights.
#33
TECH Enthusiast
Thread Starter
iTrader: (7)
Join Date: Jul 2006
Location: College Station,TX/Indy,IN
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
David- those ROWE supercharged and built vipers dont really make much power man. i hear 10psi is like MAX out of those things and that even with " built" bottom ends they are still weak.. Hell all it would take would be a mid 11 sec LSx car adn a 150 shot would show him taillights.....
For example ( if this pastes):
1999 Viper GTS/ACR Edition - Silver/Blue Stripes (1 of 30 Built)
Roe Supercharged, T&D Rockers, PBJ Intake, Borla Exhaust
618 rwhp, 651 ft/lbs torque
![](http://www.supraworld.com/viper/vipersig11_15_06.jpg)
1998 Quicksilver Supra Turbo - 980rwhp / 746 tq
Sound Performance Built and Tuned
For example ( if this pastes):
1999 Viper GTS/ACR Edition - Silver/Blue Stripes (1 of 30 Built)
Roe Supercharged, T&D Rockers, PBJ Intake, Borla Exhaust
618 rwhp, 651 ft/lbs torque
![](http://www.supraworld.com/viper/vipersig11_15_06.jpg)
1998 Quicksilver Supra Turbo - 980rwhp / 746 tq
Sound Performance Built and Tuned
#35
10 Second Club
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Jeff! When did you beat me 2 outta 3 times?
Amber never did get a chance to line up with you and get a good pull in with you. We played a bit but she NEVER raced you man! Except on the interstate and she kept getting the jump and you let out.![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
We'll have to run em sometime before you put the mods on!
I'll video tape it so there is no questions about who wins- Rather you or I win!
Amber never did get a chance to line up with you and get a good pull in with you. We played a bit but she NEVER raced you man! Except on the interstate and she kept getting the jump and you let out.
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
We'll have to run em sometime before you put the mods on!
I'll video tape it so there is no questions about who wins- Rather you or I win!
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#37
10 Second Club
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That kinda speed is just asking for trouble man! I don't mind doing a dig race from 0-120, but anything over that (on the interstate or not) is just too dangerous.
Too many things can go wrong.
#40
TECH Addict
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah a lot of cars could beat me, pretty easy when you have a shell of a car and a rear end in the car and everything is torn apart.
Yeah there are a lot of fast cars around here but how often do you see them out?
Two of them are about to run 8's on the motor, one can be driven on the street but is not.
Doug is at 10psi not tuned. I know what the car is built to handle safe and its a lot more.
It will be interesting when he cranks the boost up with the meth and has a drag wheel out back.
There are Roe cars making a lot more power then that Jeff, quite a few making 8XX to the wheels easy. I have seen one in person with Doug with me and a simple you tube search will bring some up. You think that thats not much power? I know his car is built to handle a few hundred more hp then 800.
Yeah there are a lot of fast cars around here but how often do you see them out?
Two of them are about to run 8's on the motor, one can be driven on the street but is not.
Doug is at 10psi not tuned. I know what the car is built to handle safe and its a lot more.
It will be interesting when he cranks the boost up with the meth and has a drag wheel out back.
There are Roe cars making a lot more power then that Jeff, quite a few making 8XX to the wheels easy. I have seen one in person with Doug with me and a simple you tube search will bring some up. You think that thats not much power? I know his car is built to handle a few hundred more hp then 800.
Last edited by JUICED96Z; 10-06-2008 at 08:30 PM.