check out this badass cutout
check out this badass cutout http://www.clubgp.com/newforum/tm.as...mode=1&smode=1
theres a link to the video didnt know how to link it, sorry
theres a link to the video didnt know how to link it, sorry
I think he meant burning out the cutout's motor by holding the button too long.
Regardless, just use common sense when you're opening your cutout, and don't hold the button for 100000 hours.
Regardless, just use common sense when you're opening your cutout, and don't hold the button for 100000 hours.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
Right after seeing that I talked to a friend that knows the local guy that knows the guy that built these. And was there for the video. He had been talking about it for some time. I liked the QTP ones but there are soooo many issues with those. dakota digital made them with linar actuators. but to date these are the best on the market.
Note: these sound cool but DON'T always give Power gains or ET gains!
Note: these sound cool but DON'T always give Power gains or ET gains!
Right after seeing that I talked to a friend that knows the local guy that knows the guy that built these. And was there for the video. He had been talking about it for some time. I liked the QTP ones but there are soooo many issues with those. dakota digital made them with linar actuators. but to date these are the best on the market.
Note: these sound cool but DON'T always give Power gains or ET gains!
Note: these sound cool but DON'T always give Power gains or ET gains!
So when you bypass a muffler/s you wont gain any power?
Right after seeing that I talked to a friend that knows the local guy that knows the guy that built these. And was there for the video. He had been talking about it for some time. I liked the QTP ones but there are soooo many issues with those. dakota digital made them with linar actuators. but to date these are the best on the market.
Note: these sound cool but DON'T always give Power gains or ET gains!
Note: these sound cool but DON'T always give Power gains or ET gains!
I think the sweet thing about this would be the "TPS actuation" feature. If I'm understanding it right you could set this thing to open say when you are at 90% throttle or above. I could be wrong tho.
You have to be on drugs or something man. I have a 20hp/ and about a 20tq difference to the wheels with the cutout closed vs open. I have a stock catback for the stealthy feel but the point is theres def a gain from the cutout im not sure why your saying you lost 3lbtq from one?
Being open does not hurt it. It is being opened improperly which hurts the motor. If you hold the button for longer than needed, than it will burn out the motor.
Also, you would obviously see impressive gains from running a cutout vs. stock exhaust, although the gains are marginal with a catback exhaust.
Also, you would obviously see impressive gains from running a cutout vs. stock exhaust, although the gains are marginal with a catback exhaust.
