GM HIGH TECH is looking for YOU!
12-06-2013, 09:08 AM
#1241
TECH Resident
iTrader: (3)
Join Date: May 2011
Location: pa
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
i went through most his build thread, and i must say a full spread still wouldn't do it any justice haha, That car is insanley sick with a lot of unique and wonderful thought out ideas!
12-06-2013, 10:25 AM
#1242
Thank you sir! 
(btw, your car 
)
Appreciate the words man, thanks! More to come this winter!!! 
(btw, your car )
12-06-2013, 02:06 PM
#1243
Just a clean bird: original owner, stock LS2/4L65e (for now), CAI, SW 2" headers w/3" ORY, rear coil-overs, bmr trak pak, adj LCA's and PHB; swivel cup weight jacks up front, tub adj a-arms, alum hubs, 2 pc 13" rotors, Wilwood SL 6pots behind stock rims!!, 2" drop spindles, wonder bar, STB, SFC, & Racetronix hot wire 255 walbro.
OOPs, wrong magazine
OOPs, wrong magazine
12-06-2013, 02:37 PM
#1245
Thanks, this is no 'Dirty Bird.' New paint was done this year.
As original owner and average Joe, I need to get my money back out in mileage/transportation costs. I have 217k on the car. My dream is to drive it in all lower 48 states. I need AR, MS, LA - a Beale to Bourbon trip; and all states north of Yankee stadium - a fall tour of New England.
Here's a few trip pics:
Brand new in '89 when I went out to Santa Barbara and drove up and down PCH top to bottom (in CA).
And promptly drove it into a tree!
A favorite pic from Zion Natl Park
Couldn't quite drive to Cuba
Glacier Ntl Park
On Track
As original owner and average Joe, I need to get my money back out in mileage/transportation costs. I have 217k on the car. My dream is to drive it in all lower 48 states. I need AR, MS, LA - a Beale to Bourbon trip; and all states north of Yankee stadium - a fall tour of New England.
Here's a few trip pics:
Brand new in '89 when I went out to Santa Barbara and drove up and down PCH top to bottom (in CA).
And promptly drove it into a tree!
A favorite pic from Zion Natl Park
Couldn't quite drive to Cuba
Glacier Ntl Park
On Track
12-09-2013, 11:32 PM
#1246
Staging Lane
iTrader: (15)
Join Date: Aug 2006
Location: Cincinnati
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
2000 T/A ws6 6 speed 5.3/7675cea, Moser 9 inch, umi suspension, Complete build thread here https://ls1tech.com/forums/forced-in...-page-3-a.html
01-17-2014, 09:20 PM
#1248
Staging Lane
iTrader: (3)
Join Date: Sep 2011
Location: mason shitty, illinois
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
My 2013 2ss 1le loaded with every option but the sunroof (that i did NOT want because its pointless and im too tall for one)
upgrades
Kenne bell 2.3l liquid cooled supercharger
3 3/8 pully Roughly 10.5 psi
custom cat delete pipes
60lb injectors
kb boost a pump
ngk tr6's
vengance racing plug wires
Fuse pull mod (dual mode exhaust)
Put down 553rwhp and 504rwtq on 93oct on a 93 degree day with 130 degree intake temps!
exterior mods: zl1 front bumper
everything was done in a friends garage except for the tuning that was done by Finish line performance in Naperville Il
upgrades
Kenne bell 2.3l liquid cooled supercharger
3 3/8 pully Roughly 10.5 psi
custom cat delete pipes
60lb injectors
kb boost a pump
ngk tr6's
vengance racing plug wires
Fuse pull mod (dual mode exhaust)
Put down 553rwhp and 504rwtq on 93oct on a 93 degree day with 130 degree intake temps!
exterior mods: zl1 front bumper
everything was done in a friends garage except for the tuning that was done by Finish line performance in Naperville Il
Last edited by sick02ss; 01-30-2014 at 08:45 PM.
01-18-2014, 10:24 AM
#1249
Here are couple pics of my 01' ws6!
-built bottom end
-ported fast 92
-ported/polished 243 64cc
-custom cam
-custom coil relocation (a lot of work)
-full tubular suspension
-built driveline
-all fab work and motor done by me
currently working ona set of custom fab valve covers (should be done soon)
-built bottom end
-ported fast 92
-ported/polished 243 64cc
-custom cam
-custom coil relocation (a lot of work)
-full tubular suspension
-built driveline
-all fab work and motor done by me
currently working ona set of custom fab valve covers (should be done soon)
01-25-2014, 01:20 PM
#1250
Build Name--Simple Math--550rwhp/2800lbs
1988 BMW M3 (Original M3 not clone)
LS1/Turbo T56
Car went through a complete rebuild with every nut and bolt removed which can be seen here...
http://www.r3vlimited.com/board/showthread.php?t=250378
One off turbo system.
One off hydroboost brake system
One off alot of stuff...lol
Car was built 100% by me and a friend in a 2 car garage...BUILT NOT BOUGHT!!
1988 BMW M3 (Original M3 not clone)
LS1/Turbo T56
Car went through a complete rebuild with every nut and bolt removed which can be seen here...
http://www.r3vlimited.com/board/showthread.php?t=250378
One off turbo system.
One off hydroboost brake system
One off alot of stuff...lol
Car was built 100% by me and a friend in a 2 car garage...BUILT NOT BOUGHT!!
01-27-2014, 09:18 PM
#1251
TECH Resident
iTrader: (21)
Join Date: May 2008
Location: East Brunswick, NJ
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Just a clean bird: original owner, stock LS2/4L65e (for now), CAI, SW 2" headers w/3" ORY, rear coil-overs, bmr trak pak, adj LCA's and PHB; swivel cup weight jacks up front, tub adj a-arms, alum hubs, 2 pc 13" rotors, Wilwood SL 6pots behind stock rims!!, 2" drop spindles, wonder bar, STB, SFC, & Racetronix hot wire 255 walbro.
OOPs, wrong magazine
OOPs, wrong magazine
what kinda seats are those?
04-05-2014, 09:37 PM
#1252
Teching In
Join Date: Jun 2008
Location: LONG ISLAND
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
