ford gt what?
#61
Staging Lane
Join Date: Jul 2004
Location: Anniston,AL
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
That Ford GT is nice. I believe thats the first modded one ive seen.
I really cant wait until we get some C6 Z06 guys out doing some impressive stuff like that. Maybe even the next corvette they are coming out with ''rumored LS9 or force induction 600+hp)
I really cant wait until we get some C6 Z06 guys out doing some impressive stuff like that. Maybe even the next corvette they are coming out with ''rumored LS9 or force induction 600+hp)
#62
TECH Pimp
iTrader: (1)
Join Date: Apr 2002
Location: Houston TX
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TRMIN8R
Oh and if you wanna bring money into this, how much was your stock Cobra? Take that much money and buy an LS1 f body for $10-$11k, and you still have about $20 left for mods. That'll put an LS1 f body into the 8's. And you're still stuck with a stock Cobra........
Pulley = $0 (Mine came on the car from the dealer)
Dyno Tune w/af, new spark plugs, and 180deg thermostat= $400
Install = Included in above price
Total = $400
LS1 cam shaft = $399 (I sold my stock LS6 for $225 if you want I got some magic beans too)
Manley springs, titanium retainers & MTI hardened push rods = $375
Custom PCM programming for '98-'02 LS1 F-Body = $500
Install = $0
Total = $1,274.00
All prices are from MTI's website you can find them HERE!
Thank you have a nice day..
Last edited by _Zac; 02-03-2006 at 02:57 AM.
#63
TECH Pimp
iTrader: (1)
Join Date: Apr 2002
Location: Houston TX
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02ZOh6
You could of got your Z in the 11's with a set of tires and some good air. Some guys don't even need the tires.
The Cobras stock unit went for just shy of 50,000 miles and even then it was still not near as bad as the vettes was.. Not that I didn't love the Vette I still plan on returning to a Z06 once I'm out of school.
#64
TECH Resident
iTrader: (8)
Originally Posted by _Zac
Wrong again champ.. At the time I got my car most Nice LS1's were going for around 18K. My car was just a little more then that, and it's a vert. Well worth the money I'd say..
Pulley = $0 (Mine came on the car from the dealer)
Dyno Tune w/af, new spark plugs, and 180deg thermostat= $400
Install = Included in above price
Total = $400
LS1 cam shaft = $399 (I sold my stock LS6 for $225 if you want I got some magic beans too)
Manley springs, titanium retainers & MTI hardened push rods = $375
Custom PCM programming for '98-'02 LS1 F-Body = $500
Install = $0
Total = $1,274.00
All prices are from MTI's website you can find them HERE!
Thank you have a nice day..
Pulley = $0 (Mine came on the car from the dealer)
Dyno Tune w/af, new spark plugs, and 180deg thermostat= $400
Install = Included in above price
Total = $400
LS1 cam shaft = $399 (I sold my stock LS6 for $225 if you want I got some magic beans too)
Manley springs, titanium retainers & MTI hardened push rods = $375
Custom PCM programming for '98-'02 LS1 F-Body = $500
Install = $0
Total = $1,274.00
All prices are from MTI's website you can find them HERE!
Thank you have a nice day..
now just like TRMIN8R im not a mathmatician but that is still cheaper than ur cobra
#65
Originally Posted by _Zac
I tried that the clutch blew up...
The Cobras stock unit went for just shy of 50,000 miles and even then it was still not near as bad as the vettes was.. Not that I didn't love the Vette I still plan on returning to a Z06 once I'm out of school.
The Cobras stock unit went for just shy of 50,000 miles and even then it was still not near as bad as the vettes was.. Not that I didn't love the Vette I still plan on returning to a Z06 once I'm out of school.
#66
9 Second Club
iTrader: (42)
Join Date: Oct 2004
Location: TEXAS
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by _Zac
Wrong again champ.. At the time I got my car most Nice LS1's were going for around 18K. My car was just a little more then that, and it's a vert. Well worth the money I'd say..
Pulley = $0 (Mine came on the car from the dealer)
Dyno Tune w/af, new spark plugs, and 180deg thermostat= $400
Install = Included in above price
Total = $400
LS1 cam shaft = $399 (I sold my stock LS6 for $225 if you want I got some magic beans too)
Manley springs, titanium retainers & MTI hardened push rods = $375
Custom PCM programming for '98-'02 LS1 F-Body = $500
Install = $0
Total = $1,274.00
All prices are from MTI's website you can find them HERE!
Thank you have a nice day..
Pulley = $0 (Mine came on the car from the dealer)
Dyno Tune w/af, new spark plugs, and 180deg thermostat= $400
Install = Included in above price
Total = $400
LS1 cam shaft = $399 (I sold my stock LS6 for $225 if you want I got some magic beans too)
Manley springs, titanium retainers & MTI hardened push rods = $375
Custom PCM programming for '98-'02 LS1 F-Body = $500
Install = $0
Total = $1,274.00
All prices are from MTI's website you can find them HERE!
Thank you have a nice day..
So how much is "a little more"? There is no way you got an '03 Cobra "back when a nice LS1 was 18k" for less than $28k. And who in the hell did you pay $500 to tune your LS1 PCM? You my friend, are an idiot. I got my car tuned for $150, I hope you took the vasalene with you. No matter how you look at it, the LS1 f body is just more bang for your buck. I hope those magic beans of yours give you some traction, cause there's no way your pullied "vert" will get in the 11's without some sticky tires. And that's gonna cost you more .
#67
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2004
Location: pensacola, fl.
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TRMIN8R
So how much is "a little more"? There is no way you got an '03 Cobra "back when a nice LS1 was 18k" for less than $28k. And who in the hell did you pay $500 to tune your LS1 PCM? You my friend, are an idiot. I got my car tuned for $150, I hope you took the vasalene with you. No matter how you look at it, the LS1 f body is just more bang for your buck. I hope those magic beans of yours give you some traction, cause there's no way your pullied "vert" will get in the 11's without some sticky tires. And that's gonna cost you more .
#68
TECH Pimp
iTrader: (1)
Join Date: Apr 2002
Location: Houston TX
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TRMIN8R
So how much is "a little more"? There is no way you got an '03 Cobra "back when a nice LS1 was 18k" for less than $28k. And who in the hell did you pay $500 to tune your LS1 PCM? You my friend, are an idiot. I got my car tuned for $150, I hope you took the vasalene with you. No matter how you look at it, the LS1 f body is just more bang for your buck. I hope those magic beans of yours give you some traction, cause there's no way your pullied "vert" will get in the 11's without some sticky tires. And that's gonna cost you more .
P.S. For you and the rest of the non-reading asses out there that missed it I GOT ALL THE PRICES FROM http://www.motorsporttech.com
Originally Posted by Black98Z28
18k+1,274.00= 19,274
now just like TRMIN8R im not a mathmatician but that is still cheaper than ur cobra
now just like TRMIN8R im not a mathmatician but that is still cheaper than ur cobra
Originally Posted by 02ZOh6
Yes, it seems you have to know how to finesse them off the line. Maybe the guy before you really pimped it (were u 1rst owner?). For the Z06, the clutch is the weak link, and the Cobra the rear end. Pick your poison I guess. Both great cars and intended for different purposes.
Cheers,
_Zac
#69
Originally Posted by _Zac
I went 12.3@116 in the Z06 bone stock. The car had about 30K on it when the clutch went due to the massive BFG drags and the 4500rpm launch attempt. The car was camed at that point so basically the stock clutch's days were numbered.
Cheers,
_Zac
#70
TECH Pimp
iTrader: (1)
Join Date: Apr 2002
Location: Houston TX
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
Yeah first trip to the track with the BFG's, and I thought I could get away with it..
Oh no... I dumped the clutch, the tires hooked, and the car banged the revlimiter about 30 feet out.. RIP LS6 clutch..
The Stangs stock clutch was a champ!!! In fact I wouldn't even have took it out just yet, but I had the tranny out so I figured might as well, and the car has had drags on it for over 30K miles and several trips to the track. Needless to say I was very impressed..
Oh and I forgot to say I have a Solid in my Cobra so the IRS breaking on me isn't an issue.
Oh no... I dumped the clutch, the tires hooked, and the car banged the revlimiter about 30 feet out.. RIP LS6 clutch..
The Stangs stock clutch was a champ!!! In fact I wouldn't even have took it out just yet, but I had the tranny out so I figured might as well, and the car has had drags on it for over 30K miles and several trips to the track. Needless to say I was very impressed..
Oh and I forgot to say I have a Solid in my Cobra so the IRS breaking on me isn't an issue.
#73
Originally Posted by Camaro Junkie
Cant u Two see Whats going on Here !!! Cant U two see ur in Love !!!
#74
9 Second Club
iTrader: (42)
Join Date: Oct 2004
Location: TEXAS
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by _Zac
Yeah I did get it for less, but I'm sure you could do even better since you get your cams for less than half the price everyone else gets them for, and your car gets tuned by billy bob at the midas for $150..
P.S. For you and the rest of the non-reading asses out there that missed it I GOT ALL THE PRICES FROM http://www.motorsporttech.com
You obviously aren't much of a reader either, considering I said "I got my car in the 11's for less then you can get a cam installed for", not "I got my car for less than you can pick up some **** box and put a cam in it for"... Your boyfriend TRMIN8R was the one that came with that ricer *** "your car cost more total" arguement. Darwinism at it's best..
I went 12.3@116 in the Z06 bone stock. The car had about 30K on it when the clutch went due to the massive BFG drags and the 4500rpm launch attempt. The car was camed at that point so basically the stock clutch's days were numbered.
Cheers,
_Zac
P.S. For you and the rest of the non-reading asses out there that missed it I GOT ALL THE PRICES FROM http://www.motorsporttech.com
You obviously aren't much of a reader either, considering I said "I got my car in the 11's for less then you can get a cam installed for", not "I got my car for less than you can pick up some **** box and put a cam in it for"... Your boyfriend TRMIN8R was the one that came with that ricer *** "your car cost more total" arguement. Darwinism at it's best..
I went 12.3@116 in the Z06 bone stock. The car had about 30K on it when the clutch went due to the massive BFG drags and the 4500rpm launch attempt. The car was camed at that point so basically the stock clutch's days were numbered.
Cheers,
_Zac
Well, since you seem to know it all, I got my car tuned at Texas Speed & Performance. Not Billy Bob (your redneck dad). Here's the link for the tuning..... http://www.texas-speed.com/shop/item...mid=79&catid=4
:insert foot in mouth:
It's too bad you can't bring your "11 second" Cobra of doom to Albuquerque.....you could star in my next video. I'd love to mop up the street with that turd of yours.
#75
TECH Resident
iTrader: (8)
Originally Posted by TRMIN8R
How many camS did your LS1 have?????? Mine only has one.
Well, since you seem to know it all, I got my car tuned at Texas Speed & Performance. Not Billy Bob (your redneck dad). Here's the link for the tuning..... http://www.texas-speed.com/shop/item...mid=79&catid=4
:insert foot in mouth:
It's too bad you can't bring your "11 second" Cobra of doom to Albuquerque.....you could star in my next video. I'd love to mop up the street with that turd of yours.
Well, since you seem to know it all, I got my car tuned at Texas Speed & Performance. Not Billy Bob (your redneck dad). Here's the link for the tuning..... http://www.texas-speed.com/shop/item...mid=79&catid=4
:insert foot in mouth:
It's too bad you can't bring your "11 second" Cobra of doom to Albuquerque.....you could star in my next video. I'd love to mop up the street with that turd of yours.
#76
9 Second Club
iTrader: (42)
Join Date: Oct 2004
Location: TEXAS
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Black98Z28
omg lol im so fgucking shitfaced right now man....i could careless how much u got ur unicorn into the 11's, my grandma runs 11's in her biscuit *** old *** wheel chair, sad mansad...bring ur scorpion or whatever to abq and see if it runs 11's aaahahaha i test drove a yellow 03 cobra a few days ago and d i rubed my ballsweat allover the shifter just for u my friend...car was fun though, but u my friend are not fun.....................fawk bacardi is good....mmmmmm...stock 03 cobras run high 13's here in abq, ah **** forgot they do worse here than na cars fawk me....
#77
TECH Pimp
iTrader: (1)
Join Date: Apr 2002
Location: Houston TX
Posts: 2,021
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TRMIN8R
How many camS did your LS1 have?????? Mine only has one.
Well, since you seem to know it all, I got my car tuned at Texas Speed & Performance. Not Billy Bob (your redneck dad). Here's the link for the tuning..... http://www.texas-speed.com/shop/item...mid=79&catid=4
:insert foot in mouth:
It's too bad you can't bring your "11 second" Cobra of doom to Albuquerque.....you could star in my next video. I'd love to mop up the street with that turd of yours.
Well, since you seem to know it all, I got my car tuned at Texas Speed & Performance. Not Billy Bob (your redneck dad). Here's the link for the tuning..... http://www.texas-speed.com/shop/item...mid=79&catid=4
:insert foot in mouth:
It's too bad you can't bring your "11 second" Cobra of doom to Albuquerque.....you could star in my next video. I'd love to mop up the street with that turd of yours.
Also I'll have to say no to staring your next video I don't swing that way big guy, but if you hurry Black98Z28 might still be lit enough to "help you out" with that..
Lastly, please by all means keep talking anyone that knows **** about LS1's is currently shaking their head at you thanking god that you have yet to reproduce. You want me to go race you in NM?? Get off your lazy *** and come race me here in Houston. I'll even find you some ET streets, so you can have an excuse to stop being a broke *** and buy a 12 bolt.
Cheers,
_Zac
#78
Administrator
Originally Posted by Black98Z28
ok i will, ill bring the 67 with me, should be done here soon just picked up the 555 big block and the 2 speed glide
Last edited by unit213; 02-05-2006 at 07:43 AM.
#79
Administrator
Originally Posted by TRMIN8R
It's too bad you can't bring your "11 second" Cobra of doom to Albuquerque.....you could star in my next video. I'd love to mop up the street with that turd of yours.
what yours does on nitrous...then I spray it. 750+ ft-lbs at 3,000rpm helps
get her out of the whole a little too. No going from a roll either.
I wonder if you can out-launch a solid axle Cobra on a tire. Aren't you still
running that bullshit 10 bolt? My car weighs 3,500lbs so it's not light, but it's
not as fat as most Cobras.
Some of you guys must be very poor considering you're always crying about
the price of a vehicle. You should find another hobby if you can't afford it.