Video EVO8 VS C6 Z06
#123
TECH Junkie
iTrader: (9)
Join Date: Apr 2005
Location: Miami, FL
Posts: 3,472
Likes: 0
Received 0 Likes
on
0 Posts
Genesis: Nobody got your joke... Sorry to tell you. That's either a criticism of the rest of us or of you... Hmmmmm... Take it either way.
Lag? Yeah, we all get some... You get around it just the same to where you launch and shift without any no matter what the set-up.
Lag? Yeah, we all get some... You get around it just the same to where you launch and shift without any no matter what the set-up.
#124
Just some facts 'bout my Evo:
From a dig, I launch at around 24psi... there is no lag. The only time lag plays a roll is during shift-recovery... the AEM logs during my runs with the c6z06 show a whole freaking second or higher delay from shift point at full boost to going back into full boost. However, I recently setup something in the AEM to allow me to shift *much* quicker with less risk of breaking drivetrain parts... =]
Also, just last week, I datalogged a 174mph pull at 7301rpm with the AEM. My car redlines at 10,000rpm if needed... with that being said, I'm more than confident I could hit 200mph on a long stretch of well-paved road and a good set of tires. The pull was stopped prematurely due to my low-methanol light blinking. My whole drivetrain besides the clutch and pressure plate is stock.
From a dig, I launch at around 24psi... there is no lag. The only time lag plays a roll is during shift-recovery... the AEM logs during my runs with the c6z06 show a whole freaking second or higher delay from shift point at full boost to going back into full boost. However, I recently setup something in the AEM to allow me to shift *much* quicker with less risk of breaking drivetrain parts... =]
Also, just last week, I datalogged a 174mph pull at 7301rpm with the AEM. My car redlines at 10,000rpm if needed... with that being said, I'm more than confident I could hit 200mph on a long stretch of well-paved road and a good set of tires. The pull was stopped prematurely due to my low-methanol light blinking. My whole drivetrain besides the clutch and pressure plate is stock.
#125
10 Second Club
Join Date: Aug 2005
Location: Tennessee Tech
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by boostedinaz
and this is what I hate about domestics.
They see some imports that do something and then are quick to ignorantly label everyone that way. A lot of people only want to go from certain speeds or in certain conditions. If the other person agree's and loses then that is there fault and they shouldn't cry about it.
They see some imports that do something and then are quick to ignorantly label everyone that way. A lot of people only want to go from certain speeds or in certain conditions. If the other person agree's and loses then that is there fault and they shouldn't cry about it.
I didn't even call you a ricer Mr. import racer, and you still got all upset at me....
Last edited by 273sunsetZ; 05-01-2006 at 03:45 PM.