25.5 98 z28 street car...
01-10-2008, 10:54 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: wichita,ks
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
25.5 98 z28 street car... ...in the works. the car is at holzman race cars in wichita,ks. they are doing some great work to it.
well its really coming togther, i know carpet in this thing is gonna be a b!tch!! ordered wilwood discs and calipers today...
well while i was at the chassis shop snappin a few pics off, we decided to buy a tubular k-memember to get put in. the brakes should be here this week, and all the tubing should be in the car tomorrow. they are gonna weld some wheelie bar brackets on the rear and fab up the chute mount, then the chute should be here this week also (i hope) they are also making a doub;e ajd. panhard bar
well its really coming togther, i know carpet in this thing is gonna be a b!tch!! ordered wilwood discs and calipers today...
well while i was at the chassis shop snappin a few pics off, we decided to buy a tubular k-memember to get put in. the brakes should be here this week, and all the tubing should be in the car tomorrow. they are gonna weld some wheelie bar brackets on the rear and fab up the chute mount, then the chute should be here this week also (i hope) they are also making a doub;e ajd. panhard bar
01-11-2008, 12:06 PM
#6
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: wichita,ks
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
goals are kinda vague right now, but to run and be competitive, 8.50's. hp goal is around 1100 to the wheels. the clash of the titans has an 8.50 cut off (can't run faster that 8.50) and i'll have to weigh in around 3300 i believe, and the MAKO class doesn't have a cut off and the record for them is 8.27 IIRC. if we could pull a .30 or.40 out of it i would be thrilled.
01-14-2008, 10:04 PM
#7
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2006
Location: wichita,ks
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
cage is done, chute mount done, need a peice made for chute handle, but the cable and kit is here. i'm not too sure if we are gonna run one or two batteries in the back, and still need a fuel cell. the car gets certified tomorrow, and i think the windsheild and dash are going back in, and the brakes are gonna be put on sometime soon. the front seats are here and when i find out what im gonna do about carpet they will go in. well here are some pics, once agian i gotta give it up to chad holzman i think he did a great job on this car...
