Mods
Thread Starter
Registered User
Joined: Feb 2011
Posts: 8
Likes: 0
Mods I am going to get my first mods for my 02 Z28 i bought a few weeks ago. Im thinking about getting the Loudmouth 2 exhaust.
And thinking about getting an air box, but am looking at what kind. I like the look of SLP Cold-Air "FlowPac" http://www.afterthoughtsauto.com/copa20v8caf.html
Any thoughts.
And thinking about getting an air box, but am looking at what kind. I like the look of SLP Cold-Air "FlowPac" http://www.afterthoughtsauto.com/copa20v8caf.html
Any thoughts.
LM2 isn't a bad choice, more tame than LM1.
Personally, I wouldn't bother with all that stuff that comes in the "FlowPac." The lid is the only thing I'd buy out of it, most sponsors will sell them for $90-$100. Save the $200 and put it somewhere else.
Stock filter will suffice, and the smooth bellow isn't worth much if anything other than to clean up the look of the engine bay.
Personally, I wouldn't bother with all that stuff that comes in the "FlowPac." The lid is the only thing I'd buy out of it, most sponsors will sell them for $90-$100. Save the $200 and put it somewhere else.
Stock filter will suffice, and the smooth bellow isn't worth much if anything other than to clean up the look of the engine bay.
I agree about only buying the lid. Most of the rest can be bought for cheaper.
As for the exhaust, I'd consider what the future plans are for the car. If headers aren't in the future, I'd get something louder.
As for the exhaust, I'd consider what the future plans are for the car. If headers aren't in the future, I'd get something louder.
Look on the classifieds here for lids, cai and stuff, should be able to find stuff alot cheaper than that! And i agree about making sure that you know if you want headers or not when picking your exhaust.
Not everyone wants the loudest exhaust in town. Some people want a good sound over volume.Definitely a good piece of advice! I got my lid for $62 shipped from here, and it was just as good as new. Same with my LS6 intake, got it from $320 shipped.
Trending Topics
$90 Lid
$200 CAI setup like SSRA/ FTRA/ or Chris1313
$65 Get your Throttle Body Port and Polished by a Sponser, (Damian or the SilverGhost)
$500-1500 depending on what you want (painted/coated/stainless) Headers/Y-pipe
$400-600 cat back
$200 Underdrive pulley
$125 Mail order tune from LS1tech sponser Frost
$1580-$2780 Total
Build is good for around 50-60rwhp depending on how strong your engine is. A good estimate would be a little over 400hp at the motor
$200 CAI setup like SSRA/ FTRA/ or Chris1313
$65 Get your Throttle Body Port and Polished by a Sponser, (Damian or the SilverGhost)
$500-1500 depending on what you want (painted/coated/stainless) Headers/Y-pipe
$400-600 cat back
$200 Underdrive pulley
$125 Mail order tune from LS1tech sponser Frost
$1580-$2780 Total
Build is good for around 50-60rwhp depending on how strong your engine is. A good estimate would be a little over 400hp at the motor
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo