how much have you spent on mods so far?
#81
TECH Junkie
iTrader: (21)
Join Date: Aug 2004
Location: Virginia Beach, VA
Posts: 3,164
Likes: 0
Received 0 Likes
on
0 Posts
lol. i wouldve tried the whole florida thing. but when im not on my ship, i live in tampa, and i know how long of a drive it is and i have a hardtop...so taking off the ttops...is impossible
#82
12 Second Club
Join Date: Apr 2002
Location: Palm Harbor, FL
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Probably forgetting something All becomes a blur after a while
Flowmaster Catback
Flo-Tech cut-out
GM Ram air hood
GM ram air box
K&N
CF Whisper lid
CF TSP lid (fit better)
SLP Bellow
Ported TB
Holley Intake
NGK 55 Spark plugs
Taylor 10.4 wires
ASP underdrive pulley
Comp Cam 228/224 .576 lift 112 LSA
Hardened pushrods
Comp Cam 918 springs
Hooker LT headers
Hooker ORY
Harlan shift light
Hurst Line lock
B&M Ripper
Pro 5.0 shifter shortened (wasn't happy with the Ripper)
Mcleod clutch (completely disintergrated 1st launch after 500 mi. break in)
Centerforce Dual Friction clutch
Denny's Extreme Driveshaft
SLP safety loop
Moser 12 bolt with 33 spool
410 gears
BMR STB
BMR Tubular K-member
BMR upper/lower a-arms
BMR Adjustable T/A
BMR boxed LCAs
BMR APHR
Spohn relocation brackets
Kenny Brown DD SFC
Eibach Pro kit
Nittos
ET Streets
ET Drags
Convo Pros front and rear
Rebuilt Tranny
Have spent roughly between 10,000-15,000
Flowmaster Catback
Flo-Tech cut-out
GM Ram air hood
GM ram air box
K&N
CF Whisper lid
CF TSP lid (fit better)
SLP Bellow
Ported TB
Holley Intake
NGK 55 Spark plugs
Taylor 10.4 wires
ASP underdrive pulley
Comp Cam 228/224 .576 lift 112 LSA
Hardened pushrods
Comp Cam 918 springs
Hooker LT headers
Hooker ORY
Harlan shift light
Hurst Line lock
B&M Ripper
Pro 5.0 shifter shortened (wasn't happy with the Ripper)
Mcleod clutch (completely disintergrated 1st launch after 500 mi. break in)
Centerforce Dual Friction clutch
Denny's Extreme Driveshaft
SLP safety loop
Moser 12 bolt with 33 spool
410 gears
BMR STB
BMR Tubular K-member
BMR upper/lower a-arms
BMR Adjustable T/A
BMR boxed LCAs
BMR APHR
Spohn relocation brackets
Kenny Brown DD SFC
Eibach Pro kit
Nittos
ET Streets
ET Drags
Convo Pros front and rear
Rebuilt Tranny
Have spent roughly between 10,000-15,000
Last edited by Ramair99; 01-03-2005 at 04:19 AM.
#84
Lid $95
K&N Filter $50
MAF $158
Bellow $50
Kooks Longtube Headers $780
Catted Y & Extensions $530 + $350 for installation
Loudmouth Exhaust $390 + $80 for installation
Z Hood $800 + $450 for Body shop
Firehawk Wheels $1060
Center Caps $30
Tires $520
Total $5773
I didn't figure it was that much already.
K&N Filter $50
MAF $158
Bellow $50
Kooks Longtube Headers $780
Catted Y & Extensions $530 + $350 for installation
Loudmouth Exhaust $390 + $80 for installation
Z Hood $800 + $450 for Body shop
Firehawk Wheels $1060
Center Caps $30
Tires $520
Total $5773
I didn't figure it was that much already.
#86
TECH Enthusiast
Join Date: Sep 2004
Location: Quad Cities, IL
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
GMMG - $625 Group purchase
Used TSP lid - $65
UMI short stick - $25
Put it all on myself. (real tough I know)
Total $715.00
I imagine it's capable of high 12's. But am I? I just got the car in Oct. First manual trans car ever. Learned how to drive a manual the day before I got it. The car is being stored, the lid just went on. Only drove it after the GMMG went on about 6 times. Never been to the track. Next year's gonna KICK ***!
BTW, if I ever complete the car to the point I currently dream about I hope I can keep the total under 30K.
Used TSP lid - $65
UMI short stick - $25
Put it all on myself. (real tough I know)
Total $715.00
I imagine it's capable of high 12's. But am I? I just got the car in Oct. First manual trans car ever. Learned how to drive a manual the day before I got it. The car is being stored, the lid just went on. Only drove it after the GMMG went on about 6 times. Never been to the track. Next year's gonna KICK ***!
BTW, if I ever complete the car to the point I currently dream about I hope I can keep the total under 30K.
#88
Not to bad
GMMG Exhaust - $700
Whisper Lid - About $130
UMI Short Shifter - I Dont Know, Maybe $30
MBA Shift **** $20
So About $880 But it was all for Christmas so technically I havn't spent anything!
GMMG Exhaust - $700
Whisper Lid - About $130
UMI Short Shifter - I Dont Know, Maybe $30
MBA Shift **** $20
So About $880 But it was all for Christmas so technically I havn't spent anything!
#89
Launching!
iTrader: (4)
Join Date: Jun 2004
Location: North Little Rock, Arkansas
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
SLP LM and Y pipe $549.90
4.10 gears plus labor $450.00
BMR STB $90.00
White face gauge overlay with bezel $95.00
Plugs and wires $100.00
Brent Franker decals $50.00
SLP leather shift **** $36.95
Camaro SS dash plaque $10.00
Smoked turn sig covers RKSport $30.00
Whisper lid $95.00
That's all so far
4.10 gears plus labor $450.00
BMR STB $90.00
White face gauge overlay with bezel $95.00
Plugs and wires $100.00
Brent Franker decals $50.00
SLP leather shift **** $36.95
Camaro SS dash plaque $10.00
Smoked turn sig covers RKSport $30.00
Whisper lid $95.00
That's all so far
#92
Teching In
Join Date: Jul 2004
Location: San Angelo, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
What I got
Lets see...
1. Spohn Sway Bars - Solid 4140 Chrome Moly $285.00
2. Spohn Adj. Torque Arm - LS1 F-Body w/Long Tubes $375.00
Front Loop $40.00
Chrome Moly Spherical Rod End $15.00
4130 Chrome Moly $115.00
3. Spohn Panhard Bar - Adjustable Spherical/Poly Combo $135.00
4130 Chrome Moly $30.00
4. Spohn Lower Control Arm Relocation Brackets $65.00
5. Spohn Lower Control Arms - Tubular with Poly Bushings $110.00
4130 Chrome Moly $40.00
6. HAL QA1 Front coilovers w/315lb. spring rate
Rear 12 way adj. $680
7. Kenny Brown Double Diamond Subframe connectors $240
8. Hotchkis Strut tower Brace $230
9. Centerline Corona's 18x9.5 X 4 $1600
10. Michelin Pilot Sport's 275/35ZR18F & 275/40ZR18R $1600
11. Whisper Lid $90
12. SLP LT's, Y-pipe, and cats $1200
13. Flowtech X-pipe $109
14. Dynomax 3" in/out bullets $110
15. Granitelli MAF $300
16. Corbeau CR1 front seats X2 $800
17. RCI 3in. 5point cam lock harness's X2 $300
18. B&M ripper $160
$8629.00 + $22500 for the car new 17Nov02
For a grand total of $31129
Pretty much all suspension.
Nothing done to the engine except headers.
1. Spohn Sway Bars - Solid 4140 Chrome Moly $285.00
2. Spohn Adj. Torque Arm - LS1 F-Body w/Long Tubes $375.00
Front Loop $40.00
Chrome Moly Spherical Rod End $15.00
4130 Chrome Moly $115.00
3. Spohn Panhard Bar - Adjustable Spherical/Poly Combo $135.00
4130 Chrome Moly $30.00
4. Spohn Lower Control Arm Relocation Brackets $65.00
5. Spohn Lower Control Arms - Tubular with Poly Bushings $110.00
4130 Chrome Moly $40.00
6. HAL QA1 Front coilovers w/315lb. spring rate
Rear 12 way adj. $680
7. Kenny Brown Double Diamond Subframe connectors $240
8. Hotchkis Strut tower Brace $230
9. Centerline Corona's 18x9.5 X 4 $1600
10. Michelin Pilot Sport's 275/35ZR18F & 275/40ZR18R $1600
11. Whisper Lid $90
12. SLP LT's, Y-pipe, and cats $1200
13. Flowtech X-pipe $109
14. Dynomax 3" in/out bullets $110
15. Granitelli MAF $300
16. Corbeau CR1 front seats X2 $800
17. RCI 3in. 5point cam lock harness's X2 $300
18. B&M ripper $160
$8629.00 + $22500 for the car new 17Nov02
For a grand total of $31129
Pretty much all suspension.
Nothing done to the engine except headers.
#93
Teching In
Join Date: Jul 2004
Location: San Angelo, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
The above list is of course minus labor as I don't have time to do most of this. The Y-pipe and cats are not on the car but still have them. Forgot to put computer tune from Texas Speed and Performance in Lubbock $120 and NGK TR55 plugs
#96
NKAWTG...N
iTrader: (3)
Join Date: Nov 2003
Location: Wichita, KS
Posts: 4,760
Likes: 0
Received 0 Likes
on
0 Posts
Car (used) - 26,500 (5k miles on it)
Performance:
SLP Lid - $99 (Speed Inc Open House)
Cut Out - $80ish (forgot)
Suspension:
Hotchkiss STB - $80 (used)
Trans:
Pro 5.0 w/LSS - $120 (i think)
total: $~380 or w/car: 26,880
Performance:
SLP Lid - $99 (Speed Inc Open House)
Cut Out - $80ish (forgot)
Suspension:
Hotchkiss STB - $80 (used)
Trans:
Pro 5.0 w/LSS - $120 (i think)
total: $~380 or w/car: 26,880
#97
On The Tree
Join Date: Aug 2004
Location: Jersey Shore
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NataSS Inc
Yeah, and that didnt include the cost of the 8 point .120 wall chrome moly roll cage or some of the fees associated with the instalation of some of the parts.
A rough guess would have me in excess of 30-40g's
A rough guess would have me in excess of 30-40g's
Okay here's my little list:
Performance:
Air Box Lid: $100
Air Fileter: $60
Skip Shift Eliminator: $30
Strut Tower Brace: $100
Sub-Frame Connectors: $330
Appearance:
Last of the Breed Badges: $95
Total: $715
Just ordered a Corsa Catback Exhaust: $820
Oops forgot the car: $21,500 with 7,700 miles
btw Mako22, newbies like me appreciate the thread...thanks!! and you're care is beautiful!! one the best looking Z's I've ever seen...plus I love the color .
-Ant
Last edited by Ant's-WS6; 01-29-2005 at 07:52 PM.
#99
TECH Apprentice
iTrader: (3)
Join Date: Oct 2003
Location: Woodstock, GA
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Lid- $90
LT'S and Y installed- $600
SLP LM intalled - $375
Predator and 160 stat- $420
Spings Installed -$420
Tint- $150
System- $650
Pro 5.0- $180
SSRA- $200
Rims and Tires- $1300
LS6 and TB Installed- $525
11/03-08/04 (last mod in aug) TOTAL $4910 give or take....
LT'S and Y installed- $600
SLP LM intalled - $375
Predator and 160 stat- $420
Spings Installed -$420
Tint- $150
System- $650
Pro 5.0- $180
SSRA- $200
Rims and Tires- $1300
LS6 and TB Installed- $525
11/03-08/04 (last mod in aug) TOTAL $4910 give or take....
#100
TECH Fanatic
iTrader: (2)
Join Date: Jun 2002
Location: Athens TN
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Custom ram air $30
Cool blue filter $50
Lid $120
Fernco coupler $20
Jantzer TB $280
LS6 intake, fuel injecotrs, rails, coolant lines $510
Hooker headers $720
3 catbacks and exhaust work $1200
17x9.5 wheels & tires $2000
Strano hollow sway bars front and rear $280
Trackbird LCA's and PHB $280
LCA brackets $100
LG torque arm $500
Koni SA shocks front & rear $750
Ground control coilover front & rear $440
Bear brake kit front & solo bleeders $820
Eradispeed rotors and hawk pads rear $300
LS6 clutch assembly and master cylinder $1200
Total $9600
Plus the expendables like 2 sets of tires, pads, rotors.
Cool blue filter $50
Lid $120
Fernco coupler $20
Jantzer TB $280
LS6 intake, fuel injecotrs, rails, coolant lines $510
Hooker headers $720
3 catbacks and exhaust work $1200
17x9.5 wheels & tires $2000
Strano hollow sway bars front and rear $280
Trackbird LCA's and PHB $280
LCA brackets $100
LG torque arm $500
Koni SA shocks front & rear $750
Ground control coilover front & rear $440
Bear brake kit front & solo bleeders $820
Eradispeed rotors and hawk pads rear $300
LS6 clutch assembly and master cylinder $1200
Total $9600
Plus the expendables like 2 sets of tires, pads, rotors.