rogerssgta

Hello, new to this site. I'm having problems installing the speed engineering ory. Headers fit perfect, but the y pipe won't line up. It's about 3 inches too short on the passenger side from the end of the header. And it doesn't line up straight either. Anyone else have this problem? Thanks.

rogerssgta

I have a 2002 Camaro SS.

​​​​​​

HappySalesman

iTrader: (3)

Got any pics?

ragtopz28

iTrader: (57)

Mine were the exact same way (on my 02 in sig) and had to take to a muffler shop to finish fit. My other set (98 in sig) fit with no problem...go figure

rogerssgta

No. After I couldn't get it to fit, I took the car to an auto shop to see if they could get it to fit, but they couldn't either. So then I emailed SE. SE told me to check the forums, so here I am.

rogerssgta

Guess I need to find a muffler shop that will do it. SE said they've been selling this combo for years and never had fitment issues. How much did the muffler shop charge?

2ToeRacing

iTrader: (5)

I have their headers and Y pipe,they went on ok for me. You need to show us some pictures,they really help

ragtopz28

iTrader: (57)

Pics #1 and #2 are a 3" extension on the passenger side.
Pics #3-5 are a mod to the driver side to clear the floor.
The rest are the finished product.
Buy some real clamps.
I also cut off the tapered part of the merge for a true 3" exit.

ragtopz28

iTrader: (57)

The second set I got for the 98 fit fine. I modded it to be a 4" outlet.
Big difference in sound and flow. Deep and Loud, but the 98 is a strip only car.

rogerssgta

That looks like what I will have to have done to my passenger side too. I wonder if it's because our cars are different, or the ory was made a little different. Or the headers were.

2ToeRacing

iTrader: (5)

WEEEEEELL,look at your last picture........... the 02 shouldn't be on the back of the Y pipe.
It should be on the driver side and passenger side. It should go....02(front) in each side of the collector the next pipe should have a bung of the (rear) 02 <---that pipe take the place of the cat.

ragtopz28

iTrader: (57)

Thanks...but that's my WB not an o2 (back o2's are tuned out).

98CayenneT/A

That looks to be his wideband on the back of the y.
There are o2's up front.

rogerssgta

Anyone else have Speed Engineering ory fitment problems out there? I'm really happy with their headers. Just want to finally enjoy them and finish the exhaust.

2ToeRacing

iTrader: (5)

Sorry I didn't know that's how a wide band was setup

scott tomcat

just had mine fitted.
headers fine
ory way out, exhaust place had to cut and chop it about to line up
And a nice extra bill to go with it!
Scott

formula218

iTrader: (2)

I've got their LTs and ORY on my LS swapped '94 and everything fit fine. Sounds like they've either got two different designs or the cars are a little different and their kit only fits one of the variants.

5.7stroker

iTrader: (36)

Is this an issue with their headers or their Y pipe? Considering giving these SE headers a try. So I could go with a texas speed 25-TSPSSY instead of the SE ORY on my 2000 or have they since fixed the issue?

ragtopz28, what kind of "real clamps" are you referring to?

ragtopz28

iTrader: (57)

I think the SE ORY is hit or miss (one of mine fit, the other didn't). See my other post for pics in post #8. They are "soft" band clamps I picked up at a truck shop.

rogerssgta

According to SE, they've never had a problem with customers having fitment issues of their ory. They told me to refer to this site. Apparently they're in denial, according to all the responses.