Help quick! Pro 5.0 install problem
Help quick! Pro 5.0 install problem I am trying to install my Pro 5.0 right now, and the stick for the shifter will not go onto the pro 5.0. I have a stock shifter and I have heard that it will work with this shifter, why is this not?!
The metal hanger around the stock stick is too skinny to fit around the pro 5.0 handle! Has anyone else had this problem?! How do i get around this?>!
-Todd
The metal hanger around the stock stick is too skinny to fit around the pro 5.0 handle! Has anyone else had this problem?! How do i get around this?>!
-Todd
Originally Posted by Gloveperson
I bought a used (1000 miles) pro 5.0. It did not come with a stick.
I am trying to use the non-hurst shifter that came on the 98 Z28.
-Todd
I am trying to use the non-hurst shifter that came on the 98 Z28.
-Todd
Good luck..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by cyphur_traq
werd.....that stock POS won't work. get a lss/jss. when i bought my pro 5.0 the previous owner had already cut the stock handle down so i was good to go.
I have figured that out now
The worst part was I raced a rice burner last night after I put the car back together with the stock shifter (a stupid VW with a body kit and all the bolt-ons, prob fast for a VW non-turbo) and I missed third gear
He knows I missed the gear, but still, he will tell all his friends how slow my Camaro is
-Todd
Originally Posted by Gloveperson
I am trying to install my Pro 5.0 right now, and the stick for the shifter will not go onto the pro 5.0. I have a stock shifter and I have heard that it will work with this shifter, why is this not?!
The metal hanger around the stock stick is too skinny to fit around the pro 5.0 handle! Has anyone else had this problem?! How do i get around this?>!
-Todd
The metal hanger around the stock stick is too skinny to fit around the pro 5.0 handle! Has anyone else had this problem?! How do i get around this?>!
-Todd
Originally Posted by 01RedZ28
I think i still have the original Pro 5.0 stick. I have to check if your interested i'll give it to ya i have no need for it.
-Todd
Originally Posted by Gloveperson
let me know asap since I was about to send money to this guy for his used jss!
-Todd
-Todd
