Intake question.
#21
12 Second Club
iTrader: (2)
Joined: Sep 2006
Posts: 398
Likes: 0
From: Grande Prairie, AB. That's Canada you hoser.
installuniversity.com
There's a artical under the free mods section about removing excess plastic under the air filter for MUCH better breathing.
If you look at a SLP FLowpak, you get a good lid, some shitty rubber bellow which doesn't give you 1hp on the dyno, and a metal air duct that is mounted between your A/C condensor and the rad... it draws in fresh, cool air from under the front of the car, rather than sucking in warm air from the engine bay.
The duct probly doesn't add any hp, but on warmer days, it should help keep your car fairly consitant on the track, specially when doing back to back runs.
There's a artical under the free mods section about removing excess plastic under the air filter for MUCH better breathing.
If you look at a SLP FLowpak, you get a good lid, some shitty rubber bellow which doesn't give you 1hp on the dyno, and a metal air duct that is mounted between your A/C condensor and the rad... it draws in fresh, cool air from under the front of the car, rather than sucking in warm air from the engine bay.
The duct probly doesn't add any hp, but on warmer days, it should help keep your car fairly consitant on the track, specially when doing back to back runs.
#24
Thread Starter
TECH Resident
iTrader: (9)
Joined: Mar 2007
Posts: 878
Likes: 0
From: Lincoln, Nebraska
well thats why you unbolt it first and cut it while its not connected!
jeez didnt you read the article? haha what would be the easiest device to cut it with? all i think i have is a hack saw....but that'd be hard to cut into the corners with.
jeez didnt you read the article? haha what would be the easiest device to cut it with? all i think i have is a hack saw....but that'd be hard to cut into the corners with.
#26
Originally Posted by slikrider20
well thats why you unbolt it first and cut it while its not connected!
jeez didnt you read the article? haha what would be the easiest device to cut it with? all i think i have is a hack saw....but that'd be hard to cut into the corners with.
jeez didnt you read the article? haha what would be the easiest device to cut it with? all i think i have is a hack saw....but that'd be hard to cut into the corners with.
you can use a dremel (prob Easiest) if you dont have one I used my drill and a cutting tip worked just fine
I now have a dremel and would use it first
#27
Originally Posted by slikrider20
i wonder why GM even designed it that way..wtf were they thinking its like they are tryin to get the least amount of air into the engine as possible.
same with CAGS (skip shift)
#28
ghetto
Originally Posted by slikrider20
The car isn't the one in my sig, i drive a 2000 z28. Drill some holes? Sounds ghetto.
#30
Thread Starter
TECH Resident
iTrader: (9)
Joined: Mar 2007
Posts: 878
Likes: 0
From: Lincoln, Nebraska
Originally Posted by 5_02ls1
first off the lower front portion of the fbody ls1 airbox is open....do a search on the free ram air mod...
#33
Originally Posted by slikrider20
yes i know, i pointed that out, and also i already read the free ram air mod, we're in the process of discussing what to use to cut the plastic with lol.
#35
Thread Starter
TECH Resident
iTrader: (9)
Joined: Mar 2007
Posts: 878
Likes: 0
From: Lincoln, Nebraska
This is just going to be like car audio was for me, i get something and am happy with it for like a day then its shitty and time to upgrade.
Did you notice much 5_02? And was that your first mod?
Did you notice much 5_02? And was that your first mod?
#39
just tryin to help but...........
how not to get people on ls1 tech to help you...i tried though.lright, i'm confused about the intake part of my engine. Below the stock lid, there is NO WHERE for air to get in. Its closed solid shut. How the heck do they get air into this engine?[quote]
[QUOTE]Yall must be confused too. lol[QUOTE]
whats wrong here???
1.no car info thought you had lt1{sig pic}
2.make fun of what another member tells you{drill holes that sounds ghetto}"kinda racial"
3.look at things before posting unless gm screwed up on your car that airbox is open in the front..
4.if you know the answer and have searced and viewed it why ask....
I was only tryin to help but you had to be a little know it all smartass....
[QUOTE]Yall must be confused too. lol[QUOTE]
whats wrong here???
1.no car info thought you had lt1{sig pic}
2.make fun of what another member tells you{drill holes that sounds ghetto}"kinda racial"
3.look at things before posting unless gm screwed up on your car that airbox is open in the front..
4.if you know the answer and have searced and viewed it why ask....
I was only tryin to help but you had to be a little know it all smartass....
#40
Thread Starter
TECH Resident
iTrader: (9)
Joined: Mar 2007
Posts: 878
Likes: 0
From: Lincoln, Nebraska
[QUOTE=5_02ls1]how not to get people on ls1 tech to help you...i tried though.lright, i'm confused about the intake part of my engine. Below the stock lid, there is NO WHERE for air to get in. Its closed solid shut. How the heck do they get air into this engine?[quote]
[QUOTE]Yall must be confused too. lol
whats wrong here???
1.no car info thought you had lt1{sig pic}
2.make fun of what another member tells you{drill holes that sounds ghetto}"kinda racial"
3.look at things before posting unless gm screwed up on your car that airbox is open in the front..
4.if you know the answer and have searced and viewed it why ask....
I was only tryin to help but you had to be a little know it all smartass....
1. Posted that i had a 00 Z28
2. Not making fun and it's not really racial just kinda half-assish
3. I already posted that i found that it's open earlier in the forum
Example from first page...
4. I posted the question and found the answer, the topic completely changed and you quoted something earlier in the thread, that was already covered.
Thank you very much.....smartass.
Whats wrong here? You keep quoting stuff i say and answering them way after it's already been covered. You should read the whole thing before you start accusing me of being a smartass.
[QUOTE]Yall must be confused too. lol
whats wrong here???
1.no car info thought you had lt1{sig pic}
2.make fun of what another member tells you{drill holes that sounds ghetto}"kinda racial"
3.look at things before posting unless gm screwed up on your car that airbox is open in the front..
4.if you know the answer and have searced and viewed it why ask....
I was only tryin to help but you had to be a little know it all smartass....
1. Posted that i had a 00 Z28
2. Not making fun and it's not really racial just kinda half-assish
3. I already posted that i found that it's open earlier in the forum
Example from first page...
4. I posted the question and found the answer, the topic completely changed and you quoted something earlier in the thread, that was already covered.
Thank you very much.....smartass.
Whats wrong here? You keep quoting stuff i say and answering them way after it's already been covered. You should read the whole thing before you start accusing me of being a smartass.
Last edited by slikrider20; 05-17-2007 at 05:07 PM.