bad bouse

2001 ss stock motor. what would be a good all around cam with prc 5.3 heads milled at 59cc? kinda lookin for a cam that has decent power under the curve.

'02 WS6

iTrader: (73)

tsp ms3 or pm Patrick G. and get him to grind a cam that wouldn't require you to flycut for clearance.

406malibu

wouldnt the ms3 have clearance issues with 5.3 heads?

chieftransam

I had the stage 2 heads 59cc's and ran the SpeedINC 224/224 .581/.581 112 cam and loved it. I've moved up since then but it made great power.

I would also think the ms3 would have clearance issues and Patrick G is a great guy to talk to about a cam. PM him and tell him what you want/ plans/ etc and he'll hook you up. He spec'd out my custom cam.

TXZ28LS1

iTrader: (5)

pretty tough to beat a 224/224 cams under the curve.. since your running TSP 5.3 heads i would give tsp a call on which cam would be best.

Reject

iTrader: (24)

also check out the dyno section to see what combo's other guys are running, stay away from the MS-series cam's as they are mountain cam's......they make power WAAAAAAAAAY up in the power range and loose alot down low....

Ironxcross

iTrader: (8)

power or drivability?

Z28/2002

iTrader: (27)

Not if you get the heads from TSP. They sink the valves a little to help with clearance

406malibu

ok, wasnt aware, but if the OP didnt get them from tsp i would think there'd be a bit of a problem.

MoNoXSizzlE

iTrader: (2)

I would definitely go with PM-ing Patrick G.

Bad84chevy

me too

04gtoBMXracer

iTrader: (26)

!!!