Help with power ring!!
Thread Starter
Launching!
Joined: Jan 2004
Posts: 210
Likes: 0
From: Tuttle, Oklahoma
Help with power ring!! I have a TNT kit and i can not get the power ring on with the O-Ring in the ring if i take the O-Ring out it will go on better has anyone had this problem? I just want to make sure it has a good seal. Is it ok if i leave the O-ring out? Thanks for any info.
I would say no to leaving the o-ring out. It could cause a leak downstream of the maf and throw off airflow readings. I would use the o-ring and throw some wd40 on it and slide it in. I also think that the power ring uses an allen set screw, you might have to loosen it a bit. Let us know what you come up with.
if you search- well everybody has a problem getting them on. mine took a while. use a little grease on the o-ring, and a piece of wood and a BFH. carefully beat the ******* thing on there :devil.
and yeah you need the o-ring.
it'll all be worth it when you spray it
and yeah you need the o-ring.
it'll all be worth it when you spray it
i had the same problem. i didnt have an o-ring. i took a piece of vacuum hose and sliced down the middle. it seems to be working fine. i had to take a small screw driver and poke at it until it went on all the way.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
https://ls1tech.com/forums/nitrous-o...-tnt-ring.html
here is my thread from a couple years ago. you aren't alone in this, lol
here is my thread from a couple years ago. you aren't alone in this, lol
