nano question
Thread Starter
Banned
iTrader: (9)
Joined: Jan 2009
Posts: 141
Likes: 0
From: Banned Scammer The Pat WS6
nano question How do i go about filling my n20 bottle without my nano attached? what fitting needs to go in on the hose from the nano into the n20 bottle???
cus im confused that the n20 will drain out if the hose is not connected with the nano attached?
cus im confused that the n20 will drain out if the hose is not connected with the nano attached?
If you put everyting on that the NANO came with, the fitting you attach your NANO hose to thats screwed into the N20 bottle has a check valve in it. So, when the N20 gets pressure, it seats and no leakage occurs.
But, to play it safe, I always have the hose disconnected from the N20 bottle. That prevents any small back surge up the hose and to the NANO regulator.
But, to play it safe, I always have the hose disconnected from the N20 bottle. That prevents any small back surge up the hose and to the NANO regulator.
you have to have that check valve/adapter on the N20 bottle. If you have it all on right it wont... If you have it off, try blowing thru it both ways and tell me what happends.
My suggestion on unscrewing the hose was if your bottle is COMPLETELY empty, you get a small surge going back up thru the line and into the NANO regulator if the check valve doesnt seat immediatley. That can damage your regulator causing the pressure to shoot up. I know, it happened to me and it shot up to ~1400 psi. So, im telling you to simply unscrew the hose from the adapter/check valve so it wont happen to you.
My suggestion on unscrewing the hose was if your bottle is COMPLETELY empty, you get a small surge going back up thru the line and into the NANO regulator if the check valve doesnt seat immediatley. That can damage your regulator causing the pressure to shoot up. I know, it happened to me and it shot up to ~1400 psi. So, im telling you to simply unscrew the hose from the adapter/check valve so it wont happen to you.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Banned
iTrader: (9)
Joined: Jan 2009
Posts: 141
Likes: 0
From: Banned Scammer The Pat WS6
ok but is there any thing special on that fitting? like a valve that does let nitrous out when you dont have the line from the nano connected? i cant find a pic btw
& thanks for ur help btw man
& thanks for ur help btw man
Its a check valve... Means it only lets things flow one way. So, rather you have the NANO hose hooked up to it or not, it wont let any N20 come out, only NANO in.
Call some local gas (Toll Gas is where I would look) companies and ask around, or maybe grainger?? Im not sure on the certain specs (or if there is any) that it has to be, just find out the thread size and ask around.
Thread Starter
Banned
iTrader: (9)
Joined: Jan 2009
Posts: 141
Likes: 0
From: Banned Scammer The Pat WS6