Hey guys want to see if anyone could help me out? Runnin a 200 shot direct port on my 454 through a th400 w/a Circle D 3300 stall converter. Car runs 9.23s at 148 with 1.3xx 60ft. Just added a 2nd stage (100 shot) and didnt gain any et or mph across the boards. I footbrake it to 2500 the 100 comes on at wot and the 200 is on a 1.2 sec delay. Just would like to see if anyone has any input that could help me out

Thanks

 

are you sure everything actually worked haha??

 

Went back to the pit and went over everything. act Wot swich and checked each staged one at a time sol working.

 

sounds like it isnt working. could be a amp draw issue or something.
i would turn the 2nd stage off, see if the 1st stage improves et/mph over your motor pass.

what do you have activating your stages?

 

X2.

You should do that anyway to make sure your 100 shot tune up is good before you start stacking the kits.

 

yea sounds like it isnt hitting, go back and go over EVERYTHING its always something stupid when it doesnt work

 

very true, i always did that, and with 1 stage, i start small 100-150

 

Did you check your bottles to see if you used any more nitrous than usual?