Anyone wanna play "Pass Time" here on LS1Tech???
#62
TECH Senior Member
iTrader: (2)
On the 28" tire, i would not go with a taller tire. IMO, your correct staying with the 26 and the 3.42s. hell, the 26" and 4.10 rear goes thru the traps at about 7000rpm. The 3.42s go thru the lights not in the optimum power band as it is, and 28's make it worse for record runs. however, you do have the extra power to somewhat null those statements? maybe try them both?
1st time out, 9.97@138 is my prediction, on 26s, hopefully faster and quicker...
Robert
Last edited by Robert56; 09-06-2009 at 07:29 AM.
#63
TECH Senior Member
iTrader: (2)
We have NANO assisted n2o with Wilson Pro Flow direct port through a Tony Mamo Fast 92 intake with a standalone fuel system being controlled by an NX Miximizer with FJO Wideband. The setup is for a 400 shot, but we're gonna start smaller and work up to a larger shot if needed...
Robert
#64
TECH Senior Member
iTrader: (2)
1---9.599@149.13-1.53x--LETHAL Z06----'03 10/07-402ci, H/C, ECS Novi, Post 187 Slip-Video
The list is in the second post.
C5 Z06 Fast List
Robert
#65
On The Tree
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Location: Jersey Shore, NJ
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Nice short time. My best on the old stock bottom end 346 w 200 shot and
28" Hoosiers with a 4.10 rear was a 1.41. I'm concerned that my shorts wont be quite as good now with my new rear. It's an RPM built c6 z06 rear w 3.42's... There is such a huge difference in how the two rears feel... I might have to just launch at a higher rpm or throw some more sauce on the launch... I'll have to see what it will hold...
#66
On The Tree
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Location: Jersey Shore, NJ
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
What are you launching at? Got a best of 1.53 on the BFGs and 3.42s... I use an almost complete dump at approx 5500rpm with all size shots out of the hole. We want a little spinning of the tire or our rear could be left all over the track, lol. Myself, i would rather give up a little in the short rather cut my day in 1/2 with $5k rebuild, but that's just me. going to be changing to 3.9 or 4.1 gears sometime in the future. My rear is stock except brace and one hard shaft and has survived 300+ launches, and tranny is still bone stock/untouched too.
On the 28" tire, i would not go with a taller tire. IMO, your correct staying with the 26 and the 3.42s. hell, the 26" and 4.10 rear goes thru the traps at about 7000rpm. The 3.42s go thru the lights not in the optimum power band as it is, and 28's make it worse for record runs. however, you do have the extra power to somewhat null those statements? maybe try them both?
1st time out, 9.97@138 is my prediction, on 26s, hopefully faster and quicker...
Robert
On the 28" tire, i would not go with a taller tire. IMO, your correct staying with the 26 and the 3.42s. hell, the 26" and 4.10 rear goes thru the traps at about 7000rpm. The 3.42s go thru the lights not in the optimum power band as it is, and 28's make it worse for record runs. however, you do have the extra power to somewhat null those statements? maybe try them both?
1st time out, 9.97@138 is my prediction, on 26s, hopefully faster and quicker...
Robert
I'll start out around 5400 on the 2 step and try to slip the twin disc as much as possible... I will progressively work my way up to 6500 or so depending how it sticks... It will take some time to find the right combination though as I will be
#67
On The Tree
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Location: Jersey Shore, NJ
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Have you got the Pro flow tune dialed in? Many report the rec tune to be off? They do have some of the nicest products on the planet though. Good job with that engine bay, very, very nice. Looks as you have done your home work. I would like to include that engine bay pic if that's all right (what we were talking about-pictorial). Looks like you have the same vac pump, i was told mine was the 2nd vette one out there, maybe you got the 1st, lol.
Robert
Robert
P.S. feel free to use the engine bay pic...
#68
On The Tree
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Location: Jersey Shore, NJ
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
here's what i have as the #1 spot on the any power adder list for the Z06 Fast List.
1---9.599@149.13-1.53x--LETHAL Z06----'03 10/07-402ci, H/C, ECS Novi, Post 187 Slip-Video
The list is in the second post.
C5 Z06 Fast List
Robert
1---9.599@149.13-1.53x--LETHAL Z06----'03 10/07-402ci, H/C, ECS Novi, Post 187 Slip-Video
The list is in the second post.
C5 Z06 Fast List
Robert
#76
On The Tree
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Location: Jersey Shore, NJ
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Winner of "Pass Time"
O.K. Guys, we have a winner..... The winner is TransAm2002... We ran a 9.68@143.75 and his guess was a 9.69@143.69... Nice guess TransAm2002, please PM me with your restaurant of choice so I can mail you your gift card...
A close second guess goes to 3.8redbird with a 9.67@139... Nicely done...
Stay tuned for some better numbers soon, we have some more left for next time out...
Thanks to Mark at Tirecraft (Vettewrench) in Point Pleasant for all his hard work with this build...
Thanks to Ed (Edcmat-l1) from Virginia Speed for tuning the car and coming down to Atco to help with the tune at the track car yesterday...
Thanks to RobZ for all the good advice on suspenstion setup and launch techniques...
Thanks for everyone who played...
A close second guess goes to 3.8redbird with a 9.67@139... Nicely done...
Stay tuned for some better numbers soon, we have some more left for next time out...
Thanks to Mark at Tirecraft (Vettewrench) in Point Pleasant for all his hard work with this build...
Thanks to Ed (Edcmat-l1) from Virginia Speed for tuning the car and coming down to Atco to help with the tune at the track car yesterday...
Thanks to RobZ for all the good advice on suspenstion setup and launch techniques...
Thanks for everyone who played...
Last edited by stonabones; 09-26-2009 at 02:19 PM. Reason: forgot something
#77
TECH Senior Member
iTrader: (2)
O.K. Guys, we have a winner..... The winner is TransAm2002... We ran a 9.68@143.75 and his guess was a 9.69@143.69... Nice guess TransAm2002, please PM me with your restaurant of choice so I can mail you your gift card...
A close second guess goes to 3.8redbird with a 9.67@139... Nicely done...
Stay tuned for some better numbers soon, we have some more left for next time out...
Thanks to Mark at Tirecraft (Vettewrench) in Point Pleasant for all his hard work with this build...
Thanks to Ed (Edcmat-l1) from Virginia Speed for tuning the car and coming down to Atco to help with the tune at the track car yesterday...
Thanks to RobZ for all the good advice on suspenstion setup and launch techniques...
Thanks for everyone who played...
A close second guess goes to 3.8redbird with a 9.67@139... Nicely done...
Stay tuned for some better numbers soon, we have some more left for next time out...
Thanks to Mark at Tirecraft (Vettewrench) in Point Pleasant for all his hard work with this build...
Thanks to Ed (Edcmat-l1) from Virginia Speed for tuning the car and coming down to Atco to help with the tune at the track car yesterday...
Thanks to RobZ for all the good advice on suspenstion setup and launch techniques...
Thanks for everyone who played...
Robert
#80
10 Second Club
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
Just finished getting my car together and made our first few NA passes on passes on Thursday night before we spray it next week... On Drag Radials and not in "Kill mode" , in the heat it went 10.93 @ 129.32... I'm, pretty confident with good air and slicks and a little more seat time we'll get her to 10.50s N/A.... We will be spraying the next time out, which will be in a week or two and are really curious what she'll do on n2o.....
So here's the "Pass Time" guess.......
The setup: C5 Corvette coupe, 6 spd with Spec twin disc, c6 zo6 rear w 3.42 rear, tr6060 trans, 26" Hoosier slicks with a full weight plus... around 3650 I guess.... Motor makes 522 rwhp and 469 rwtq... on the spray it made 762 rwhp 701 rwtq…
All questions are welcomed....
Anyone venture to guess WHAT IT WILL RUN ON NITROUS? Let's see who wins....
So here's the "Pass Time" guess.......
The setup: C5 Corvette coupe, 6 spd with Spec twin disc, c6 zo6 rear w 3.42 rear, tr6060 trans, 26" Hoosier slicks with a full weight plus... around 3650 I guess.... Motor makes 522 rwhp and 469 rwtq... on the spray it made 762 rwhp 701 rwtq…
All questions are welcomed....
Anyone venture to guess WHAT IT WILL RUN ON NITROUS? Let's see who wins....
6.30 in the 8th
106mph
9.80 in the 1/4
140mph