Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Question about nitrous tune

Thread Tools
 
Search this Thread
 
Old Sep 21, 2009 | 05:28 PM
  #1  
Powerhouse's Avatar
Thread Starter
TECH Regular
15 Year Member
iTrader: (4)
 
Joined: Oct 2005
Posts: 443
Likes: 0
Default Question about nitrous tune

I recently had my car tuned for a 150 wet shot. Only thing that worries me is I've seen multiple threads stating that you do NOT want to be too rich on a nitrous tune. On mine, its 10:1 all the way across the board.

Is this TOO rich?
Reply
Old Sep 21, 2009 | 06:12 PM
  #2  
kinglt-1's Avatar
TECH Senior Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (26)
 
Joined: Jul 2005
Posts: 5,892
Likes: 253
From: Ft. Wayne, IN
Default

Im prretty sure you want to be in the high 11's low 12's. From what I understand your borderline on lifting a ring running that rich.
Reply
Old Sep 21, 2009 | 06:19 PM
  #3  
Powerhouse's Avatar
Thread Starter
TECH Regular
15 Year Member
iTrader: (4)
 
Joined: Oct 2005
Posts: 443
Likes: 0
Default

Can I adjust it by switching out the fuel jet?
Reply
Old Sep 21, 2009 | 07:25 PM
  #4  
BobDoLe's Avatar
TECH Fanatic
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (11)
 
Joined: Jul 2006
Posts: 1,516
Likes: 3
Default

how does it run?
i'd just go back to the tuner and take it up into the 11-12 range.
Reply
Old Sep 21, 2009 | 08:36 PM
  #5  
ATVracr's Avatar
9 Second Club
iTrader: (5)
 
Joined: Mar 2004
Posts: 5,297
Likes: 1
From: GB
Default

Might not hurt anything on only a 150 shot but its going to be slow.

get it in the high 11's - low 12's to be safe and fast.
Reply
Old Sep 21, 2009 | 08:54 PM
  #6  
kinglt-1's Avatar
TECH Senior Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (26)
 
Joined: Jul 2005
Posts: 5,892
Likes: 253
From: Ft. Wayne, IN
Default

Originally Posted by Powerhouse
Can I adjust it by switching out the fuel jet?
Yes, especially if it only runs this rich on the bottle.
Reply
Old Sep 21, 2009 | 09:44 PM
  #7  
Powerhouse's Avatar
Thread Starter
TECH Regular
15 Year Member
iTrader: (4)
 
Joined: Oct 2005
Posts: 443
Likes: 0
Default

Well I got a decent gain out of it. Went from 457\395 to 590\603. It runs fine. I haven't been able to get a good run with the spray because the nitrous solenoid stuck open. I'll have to wait till' I get them replaced.

Originally Posted by ATVracr
Might not hurt anything on only a 150 shot but its going to be slow.

get it in the high 11's - low 12's to be safe and fast.
Reply
Old Sep 22, 2009 | 12:27 PM
  #8  
Nick@HSW's Avatar
FormerVendor
iTrader: (4)
 
Joined: Jul 2005
Posts: 1,954
Likes: 0
From: Glenolden, PA
Default

Hmm, are you sure that the sensor is still good?

Nick
Reply
Old Sep 22, 2009 | 04:52 PM
  #9  
Powerhouse's Avatar
Thread Starter
TECH Regular
15 Year Member
iTrader: (4)
 
Joined: Oct 2005
Posts: 443
Likes: 0
Default

I don't have a wideband. It was the one they used on the dyno.
Reply




All times are GMT -5. The time now is 02:50 AM.