reading plugs
#21
tnt 150 hp 51lbs of fuel pressure 0n stand alone I have adjustable regulator and will be tuning with fuel pressure not jets .This was from one pass yesterday on spray.the other plugs I described in post were darker and I took your advice and pulled some fuel on this pass . 7.16 @ 95 n/a 6.65@ 106 on spray but didn turn on nos till about 60 foot out so probably more like a 6.50 if I would have turned it on qicker but I wanted to make sure I hooked because it was a grudge race.60 ft was 1.59 na and nos
#23
#25
#26
9 Second Club
iTrader: (21)
Alot better then I thought they were gonna look. Lol. Very similar to what mine look like on a 150 with a 62 32. Mine are a little less rich then yours and we will go to a 30 jet next time out and take a degree away from it. My threads and base are slot cleaner then yours. I would say it is oil as well.
#28
TECH Addict
iTrader: (11)
Are those the last plugs or did you change pressure and have another set to post? if those are the last plugs go down 2-lbs of fuel. on the next hit evey time you lean it out you need to pull a little timming once the fuel is good you might be able to creep some timming back in.
#29
Are those the last plugs or did you change pressure and have another set to post? if those are the last plugs go down 2-lbs of fuel. on the next hit evey time you lean it out you need to pull a little timming once the fuel is good you might be able to creep some timming back in.