Nitrous Plate

Reply Subscribe

Thread Tools

Search this Thread

Mar 30, 2010 | 11:35 AM

SINISTER-TA

Thread Starter

On The Tree

iTrader: (3)

Joined: Nov 2006

Posts: 160

Likes: 0

Nitrous Plate

I'm currently running a Nitrous Outlet 78mm plate on by TA. I'm going to swap my LS6 intake to the FAST 102 w/matching throttle body. I'm thinking about having the 78mm plate machined out to fit the 102mm opening of the FAST intake and throttle body. Has anyone ever done this? Or am I asking for trouble? I know this would be a very delicate process, but in the hands of a competent machinist, I think it's more than achievable.

Thoughts?

Mar 30, 2010 | 11:48 AM

Nick@HSW

FormerVendor

iTrader: (4)

Joined: Jul 2005

Posts: 1,954

Likes: 0

From: Glenolden, PA

Check your bolt patterns...

Nick

Mar 30, 2010 | 11:55 AM

SINISTER-TA

Thread Starter

On The Tree

iTrader: (3)

Joined: Nov 2006

Posts: 160

Likes: 0

Quote:

Originally Posted by Nick@HSW

Check your bolt patterns...

Nick

Do you think the 102 will have a larger/wider bolt pattern than the factory configuration?

Mar 30, 2010 | 12:12 PM

Nick@HSW

FormerVendor

iTrader: (4)

Joined: Jul 2005

Posts: 1,954

Likes: 0

From: Glenolden, PA

Quote:

Originally Posted by SINISTER-TA

Do you think the 102 will have a larger/wider bolt pattern than the factory configuration?

Its 4 bolts vs. 3 on the factory stuff.

Nick

Mar 30, 2010 | 12:15 PM

SINISTER-TA

Thread Starter

On The Tree

iTrader: (3)

Joined: Nov 2006

Posts: 160

Likes: 0

Quote:

Originally Posted by Nick@HSW

Its 4 bolts vs. 3 on the factory stuff.

Nick

Ok, I see. That didn't cross my mind when I was thinking about it. Guess a new plate is in my future. Are there even plates available for the 102 yet?