Some opinions on this plug.
Thread Starter
9 Second Club
Joined: Dec 2006
Posts: 61
Likes: 0
From: Gardendale AL
I see. I only have the weak 7530t so i need one lmfao. here is some updates from the track:
Went to the track tonight, made 3 motor passes trying to get the 2step set and the suspension working. Went to make a nitrous pass, nitrous would not work. I thought maybe it was not hitting the WOT switch. Checked it, good. Tried making another nitrous pass. After waiting for the jackass in his beatup nova who thought he has to do a NHRA burnout then dry hop it 5 times, then get his friend to line him up in the groove, which took him backing up 3 times, I was so damn pissed but I tried footbraking it, and leaving on the bottle, nope nothing. Went back around found no power going to the relays, fuse is good. So going to check it tomorrow and weather permitting we will take it out tomorrow night.
Went to the track tonight, made 3 motor passes trying to get the 2step set and the suspension working. Went to make a nitrous pass, nitrous would not work. I thought maybe it was not hitting the WOT switch. Checked it, good. Tried making another nitrous pass. After waiting for the jackass in his beatup nova who thought he has to do a NHRA burnout then dry hop it 5 times, then get his friend to line him up in the groove, which took him backing up 3 times, I was so damn pissed but I tried footbraking it, and leaving on the bottle, nope nothing. Went back around found no power going to the relays, fuse is good. So going to check it tomorrow and weather permitting we will take it out tomorrow night.
Launching!
Joined: May 2004
Posts: 286
Likes: 0
From: Tuscaloosa, AL
Man you can still do alot of stuff with that box. Dont be affraid to knock a bunch of timing out of it to get it to leave on those radials when you are spraying it. You can use that box to do alot of different things and you wont have to be putting plungers in the
N2O solenoids often. But thats just my opinon.
N2O solenoids often. But thats just my opinon.
Thread Starter
9 Second Club
Joined: Dec 2006
Posts: 61
Likes: 0
From: Gardendale AL
haha I know it has some nice options for the timing retard and everything on the launch. I found out the hard way last night that it had some rev limiter built in the limited it to 2000rpm 9 seconds after leaving on the transbrake. That could have been a very bad thing.
Man that blows. Gotta love electrical issues. Always seem to get us. Hopefully you can get out tonight and get some results. Headed to the track here in a little. Without the car though. 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
9 Second Club
Joined: Dec 2006
Posts: 61
Likes: 0
From: Gardendale AL
Well went to the track tonight. Made 2 motor passes. Warmed the bottle, good burnout track was decent<My car was hooking and 60' good at least> so decided to leave on the trans brake and bottle. Came of the trans brake and exploded the center section. Guess I have to get a center section, new gears, new pinion support, possibly a yoke and driveshaft too. Oh well it's just money right?
Yeah damn you!! You ruined it for me! lol probably not cause that bitch was slicker than owl **** anyways.. I had the bottle warmed and a timing set up in the MSD 7530 and was hoping to make some forward progress but NOOOOOOOOOO you just had to scatter the rear end... you suck. 
