10.46@133
Thread Starter
Teching In
Joined: Jan 2011
Posts: 41
Likes: 0
10.46@133 my pb for now.
Forged 347
ms4 cam
prc stage 2.5 59cc 5.3 heads
fast 90/90
tsp 1 7/8 headers
3 in y pipe with cutouts
bosch 044 in tank
self built nitrous stand alone fuel system c16 in tank
built 4l60e
circle d 4500 stall
STOCK 10 BOLT
weld pro stars with 275/50/15 et street radials @ 15psi
fastest motor pass was 11.67@119
because of the 10 bolt i've set a 2 second delay on my first stage with 1.2 sec progression from 60% to 100% and a 2.5 sec delay on my second stage with 1.4 sec progression from 50% to 100%
first stage 100 shot second stage 150 shot
pics:
Forged 347
ms4 cam
prc stage 2.5 59cc 5.3 heads
fast 90/90
tsp 1 7/8 headers
3 in y pipe with cutouts
bosch 044 in tank
self built nitrous stand alone fuel system c16 in tank
built 4l60e
circle d 4500 stall
STOCK 10 BOLT
weld pro stars with 275/50/15 et street radials @ 15psi
fastest motor pass was 11.67@119
because of the 10 bolt i've set a 2 second delay on my first stage with 1.2 sec progression from 60% to 100% and a 2.5 sec delay on my second stage with 1.4 sec progression from 50% to 100%
first stage 100 shot second stage 150 shot
pics:
Trending Topics
you don't by chance know what the fastest time on a 10 bolt is do ya? Ive tried searching, but just cannot seem to find anything. very impressive tho for sure. again awesome and good luck getting into the 9's.
I'm on a stock rear also, but I don't think we'll see 9s in a 10 bolt unless it's an ok 1.5 60' at around 137 mph, that's of course if everything else is working properly.
Im not sure if it's the fastest but i have a stock 10 bolt with 3.42's that has seen 10.1xxs multiple times @ over 133mph.....
Seems like you be 60ft harder with the ET and mph shows its got *****, How do you launch? Nice times for sure. Still thinking about getting some of those 5.3 heads since the price is right and ppl haul the mail with them. Any flycutting with that cam?
Thread Starter
Teching In
Joined: Jan 2011
Posts: 41
Likes: 0
3.23 rear gear. Amsoil fluid changed every 2 months. Welded tubes.
Car has a 4500 stall in it. I leave the line around 2700 off the footbrake. Stage progression and timing are all in the first post.
First stage is 100 shot second stage is 150 shot.
Car has a 4500 stall in it. I leave the line around 2700 off the footbrake. Stage progression and timing are all in the first post.
First stage is 100 shot second stage is 150 shot.