LilJayV10

iTrader: (39)

Forgive me it's late and I am drunk.

I recently purchased a FAST 102 w/ FAST rails. I had a LS6 w/ stock rails that I was running a fuel solenoid off the schrader valve at the end of the rail.

How are you guys doing it with the FAST rail?

samdogmx

iTrader: (14)

I have a tee fitting after the rail before the regulator.

Nitro Dave's Nitrous Outlet

iTrader: (25)

Depends on how your rails are plumbed up. The most common is a manifold off the front driver side rail fitting. A 1/8 x 4 an 90 degree fitting screws into the side of it to kick back to feed the fuel solenoid.
Dave

LilJayV10

iTrader: (39)

Would you happen to have a link to that?

Nitro Dave's Nitrous Outlet

iTrader: (25)

Do you have a picture of your set up? If so Ill link you to everything you need based off your picture.
Dave

LilJayV10

iTrader: (39)

I don't have a pic at the moment.

The feed line comes into the front of the driver side rail, I think it's a 6an fitting, the crossover is in the back.

Nitro Dave's Nitrous Outlet

iTrader: (25)

OK,.
This is what you should need.

-6 swivel manifold.
http://www.nitrousoutlet.com/catalog...3&product=4158

1/8npt x 4 an 90
http://www.nitrousoutlet.com/catalog...1&product=3762

This will get you off the rail and kicked back to the solenoid.
Dave

LilJayV10

iTrader: (39)

Thanks for the input. I think I happen to have those things laying around actually.

Beer99C5

iTrader: (21)

I am in the process of doing this as well with a Fast 102.

Got the -6AN swivel like dave suggested. I am running a T off the 1/8 NPT, and plan on a -4AN hardline to the noid (in), and the other end of the T is a fuel pressure sending unit. May have pics this weekend.

Grant@NitroDaves