Watch out all Stock Cubic inch players... Were ready
#25
Thread Starter
9 Second Club
iTrader: (21)
Joined: Apr 2006
Posts: 3,240
Likes: 1
From: sacramento, CA
here is the 5.95 pass last year 1.35 sixty foot on 26x8.5 goodyears... .099 jet and little timing took out at the hit, this was the only good pass we got on the goodyears last year
http://www.youtube.com/watch?v=Q2ZOFGbRGkU
and this is the tire were running this year. Class called street challenge.. 255/60/15 real street tire... hopefully 9.20s-9.30s on this one
http://www.youtube.com/watch?v=Q2ZOFGbRGkU
and this is the tire were running this year. Class called street challenge.. 255/60/15 real street tire... hopefully 9.20s-9.30s on this one
#27
Thread Starter
9 Second Club
iTrader: (21)
Joined: Apr 2006
Posts: 3,240
Likes: 1
From: sacramento, CA
Yes sir and were gonna bust their *** in their 2700lb 280z (with 200lbs of lead in the trunk) this year if they show up. We tried to run this combo at Vegas at SCSN this past year but ran into too many problems and went out first round. We're ready to go for this year
#34
When you took the heads off how did the tops of the pistons look?
#37
Thread Starter
9 Second Club
iTrader: (21)
Joined: Apr 2006
Posts: 3,240
Likes: 1
From: sacramento, CA
No wonder that thing gets out of the hole so fast on the street it weighs 2500lbs!!! Is the 2700lbs. a minimum weight or do they need all the lead to hook? Seems like poor weight distribution if it's the latter, anyways I hope you guys do bust their *** I've seen their videos and other dealings(poo) on other Nat Geo shows, stand up group of guys they seem like LOL!
When you took the heads off how did the tops of the pistons look?
When you took the heads off how did the tops of the pistons look?
But the pistons were the thing I wanted to see when we got the heads off and they look damn good actually. No signs of anything going on. It was sure a relief, I was a little worried.
yes stock rod bolts, 300+ passes on this motor
nice! good luck to you