How big a shot? Cam? Heads?

 

<img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />

 

I had horrible times but the MPH was good-

Natural-2.3 60,13.4 at 106mph
Nitrous-2.4 60,12.5 at 118mph

This is a M-6,stock tires and a TNT 75 shot.
No headers.

 

totally stock motor ,nos dry kit (36 jets) asp pulley, mafs for dry kit,air box lid,3200 tci stall, boxed lca's,bfgdr's 17/275/40. Best et 11.67 @115 mph 1.60 60ft. 3880 lbs with me and a full 15lber 1/2 tank of gas 2000 SS convertable. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

 

the day i ran mine at the track on the juice last, i eased it off the line and hit it in the top of 1st gear and went a 12.13 @ 120.7 with a 2.09 60. on motor it went 12.70 @ 113 that day. that was done on a nx 100 wet shot

<small>[ March 26, 2002, 05:28 PM: Message edited by: EVIL ]</small>

 

10.83 @ 129.4. 150 shot (Compucar back then) only a B1 and boltons <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

 

Fastest time so far is a 10.97 @ 131.6 mph...had some wheel spin in 3rd gear

<small>[ April 21, 2002, 12:01 AM: Message edited by: Fast SS on NOS ]</small>

 

So far, I have 11.6 @ 123. I dont know the 60 as the slip didnt print. Just the timing board. that was 150 wet and the sig.

 

back then i had a nos dry kit 100 shot on et streets with a crane 208/216 cam, cutout, flowmasters, pulleys, lid, hypertech, and 3:73's and ran an 11.56@119 on an m6

 

I went 12.007 @ 119.15 with a 1.85 60 foot on a 100 shot, MTI stage II heads/cam, Mac headers, cutout, ET Streets and skinnies at Bandimere (5800 foot). This was on a slipping stock clutch and a stock rear with 4.10s.

 

Sean Freeze went 10.3x at 128? with stage 1 heads, a 226/234 554/575 110 cam, vig 3200 (i think), stock 3.23 rear, and a two stage wet.

 

Time in my sig is with 900psi bottle pressure, shifting at 6500, light launch.

 

10.38 w/75 Shot Cam, Heads & 427ci looking for low 9's with our new direct port.. and a 400hp shot + 75wet shot..

 

Best so far 10.95 at 122 stock no cam, no heads no headers, just a flowmaster et streets and 4.10s oh yeh centerforce clutch

 

TOSTO, now that is a running car!!

 

Yea, how much were you spraying??

I know 99redhawk sprayed over like 400 to get his 10.30 at 132... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I think he was heads/cam though, not too sure...

 

Holy Crap!!!! Tosto how did you do that?!? If this was in import forum, I'd call you a poser, but deep down inside I think an LS1 can do that! Please update us on your setup. I am running high 10's and have blown thousands of bucks
<img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />

 

I went 11.00@127.68 with a 1.7760ft. Weighed in at 3625lbs. Heads/cam/TNT 100 shot. 10s shouldnt betoo far off if I learn how to drive a lil harder. BTW stock rear with 3:73s <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

 

11.16@122 with 1.63 60ft twice and at diffferent times of the year and at two different tracks.
Nitrous Works 125 shot and went 11.45 @118 with the stock converter in the car. <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />

 

Those are some nice times guys....