MT0911

That is awesome man! 117 is no joke! Great job

camscam02

iTrader: (21)

New favorite picture of the car. So awesome

camscam02

iTrader: (21)

Now were looking for that 120mph mark!

02sleeperz28

iTrader: (26)

That picture is awesome! Foot brake or T-brake?

camscam02

iTrader: (21)

Trans-Brake. 3600 on the 2 step, progressed over .4 seconds, 130 degree track temp. It worked... haha

BSmiff

Nothing wrong with that in the heat. Do you think you have enough to run with those guys stock cube?


Posted from LS1Tech.com App for Android

WhiteLTone

iTrader: (18)

Great pic Cam! Good luck chasing the 120 mark. Cant wait to get my new bullet back, Steve at Inductions Solutions. Just finished up my kit - this fall is gonna be fun!

87silverbullet

iTrader: (11)

Did the announcer just say you have 412 cubes under the hood? Something you not telling us Cam?

camscam02

iTrader: (21)

Nope I'm 4-5 tenths of the front runners unfortunately, but hopefully next year we will be right there with them

Thank you Sir. We will continue to push the envelope. And you guys are gonna have the bullet to beat. Goodluck with it!

Haha if I had this cubic inches it better run in the 50s. That's actually my good friends Eric Gustafsons car. 412ci ls Procharged motor in the 69. Been mid 5.30s. It's a beauty

WhiteLTone

iTrader: (18)

Cam - i dunno bout the bullet to beat bit i hope ot runs good. From what steve at IS said my old n20 solenoid was hurt and slow to open, between that and the bump in compression id like to think itll hang well with everyone. Best of luck in good air. Lets keep putting big blocks on the trailer.

SuperSlow02

iTrader: (16)

WOW! I havnt been in this section much lately, I've been missin out! Excellent job cam!!!!! You just keep raising the bar man!

Sales@Tick

iTrader: (3)

Your kit isn't the one he made the youtube video about is it?

Sofls1

iTrader: (16)

Sweet pic!

WhiteLTone

iTrader: (18)

haha i wish. nope mine is just a worked over single stage plate kit.

minytrker

iTrader: (13)

The pic look great. Do you normally have the front so loose (no limiters)or was it like that because of the heat and the track? 130 is a good track temp here in TX, lol.

THADD

iTrader: (12)

Hey Cam, I will be running in the 8.5 shootout in KY in a few weeks. Do you by any chance have any used take off's that you would want to sell? I'm trying to avoid buying new tires for this one race.

Sales@Tick

iTrader: (3)

No not the one that was flying around lol, he made another video about a kit he had that a customer sent in to be flowed because it was under-performing and the user thought it should be running better.

It showed some nasty crudded up solenoids and a leak in the spray bar at the plate.

WhiteLTone

iTrader: (18)

****. I didnt see that video, got a link to it? That may very well be my kit haha.

a98ws6

iTrader: (48)

I didnt know you ran 8.5 Cam. Im building my car for that class. And it will be Nano assisted. Lol
I have a question though, why not use the Hoosiers? Everyone used MT's here and switched to the Hoosiers and everyone picked up and they last longer. Anymore pics underhood, or what have you removed for weight? Basicly i want to know your entire setup. Lol

Sam88Gta1

iTrader: (13)

What does the car weigh?
How much nitrous? (what size jets)