New best... hurt motor finally PICS ADDED
#46
FormerVendor
iTrader: (3)
First one was my fault really. I specified it to be way too loose and missed peak torque by 600rpm with the flash point.
Just hoping this one I have now flashes 5200 on all the jet I'm going to throw at it.
#47
She got a little hot. Plugs and more octane it would of lived. My fault, I knew better
Got it apart the other night and she isnt hurt too bad at all. Getting new pistons aiming for 12-13:1 compression, heads are already getting fixed, new rings and bearings and a cam change to spin this baby to 7600-8000. Possibility of putting a 4.00 stroke crank in the motor since one is sitting around in the shop. Should be back together in 2 weeks. Got lucky with this one
Looking for 5.50's in Vegas! Watch out world.
Got it apart the other night and she isnt hurt too bad at all. Getting new pistons aiming for 12-13:1 compression, heads are already getting fixed, new rings and bearings and a cam change to spin this baby to 7600-8000. Possibility of putting a 4.00 stroke crank in the motor since one is sitting around in the shop. Should be back together in 2 weeks. Got lucky with this one
Looking for 5.50's in Vegas! Watch out world.
#59
We are officially done with the stock cubic inch stuff, we would love to demolish all the records that we could of but with the heads up stuff we do we had to add as much power as we can.
New motor is a 12.5:1 383 still using the stock block. Same heads and intake but we are really looking for a new camshaft. Anybody out there want to try something and want to donate one to our program to show off please let me know. The motor is coming together and should be back by next week. We need the help, looking to run 5.40's 5.50's on 26x8.5.
Let me know and thanks everybody for the support!
New motor is a 12.5:1 383 still using the stock block. Same heads and intake but we are really looking for a new camshaft. Anybody out there want to try something and want to donate one to our program to show off please let me know. The motor is coming together and should be back by next week. We need the help, looking to run 5.40's 5.50's on 26x8.5.
Let me know and thanks everybody for the support!