and the Stock Cube Record falls *vid added*
#21
11 Second Club
iTrader: (24)
Join Date: Nov 2003
Location: Chitown, IL
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What's the break down of the motor if you don't mind sharing?
Aluminium block?
what heads?
Edelbrock intake?
main studs?
head studs?
what size converter
etc....
don't be shy now!
Brian
Aluminium block?
what heads?
Edelbrock intake?
main studs?
head studs?
what size converter
etc....
don't be shy now!
Brian
#22
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
C'mon Brian!
We got this **** on
![Locked ...](https://ls1tech.com/forums/images/smilies/lockd.gif)
#25
TECH Resident
iTrader: (18)
Join Date: Oct 2004
Location: Chicago, IL
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
But im not gonna give you my exact setup. We worked hard on this setup. LRE is a phone call away. Its a carb, hyd roller cam, dart heads, vic jr. Plate kit with a motor converter that likes spray apparently. Were really still getting a handle on this setup. 3 passes so far 2 went on the bumper and the other went 9.19. Next year should be fun!
#28
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's a 5.3 iron block, bored 3.905. Ported Dart heads that I did in house at my shop, off the shelf vic jr, off the shelf Q850, stock rockers(not even trunion upgrade), Comp push rods, K-motion springs, ls7 lifters, my custom cam, Cloyes double roller timing chain, melling HV pump, callies compstar rods, diamond pistons, clevite HX bearings, stock 5.3 crank polished. ARP main studs, ARP head bolts. Block is half filled also. The block added about 150lbs to the car, and we only used it because I had it sitting there machined and ready for another build after we hurt the aluminum block..
As Nick said, we went 9.19 on our 3rd pass basically on the new combo.. Totally out of the box .86 jet tune up from Steve Johnson, we had #10 plugs in it and it was pig rich in one of the pictures you can see it rolling smoke for 200feet.
1st pass
![](http://i2.photobucket.com/albums/y13/WatchitNow/DSC_0482.jpg)
2nd pass(record)
![](http://i2.photobucket.com/albums/y13/WatchitNow/DSC_0947.jpg)
![](http://i2.photobucket.com/albums/y13/WatchitNow/DSC_0950.jpg)
3rd pass(broke the travel limiter and car went hard left, had to lift)
As Nick said, we went 9.19 on our 3rd pass basically on the new combo.. Totally out of the box .86 jet tune up from Steve Johnson, we had #10 plugs in it and it was pig rich in one of the pictures you can see it rolling smoke for 200feet.
1st pass
![](http://i2.photobucket.com/albums/y13/WatchitNow/DSC_0482.jpg)
2nd pass(record)
![](http://i2.photobucket.com/albums/y13/WatchitNow/DSC_0947.jpg)
![](http://i2.photobucket.com/albums/y13/WatchitNow/DSC_0950.jpg)
3rd pass(broke the travel limiter and car went hard left, had to lift)
![](https://theblock.com/sites/default/files/articles/attachments/LSX-Shootout-Night-3.jpg)
#29
TECH Resident
iTrader: (18)
Join Date: Oct 2004
Location: Chicago, IL
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
He is always super mean. Ps my names Nick, im 27, i like coors light, long walks on the beach, and anything thats neon green. The car weighs 3060# with me and the 5.3block in it.
#33
TECH Resident
iTrader: (18)
Join Date: Oct 2004
Location: Chicago, IL
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
A few updates...
Got my new super vic, 2" kooks, Leash electronics, made some lightweight door panels, removed all the stock wiring, and added a lightweight steering column from dmh. Switched out the sa qa1's for some strange da front coilovers, so far i took another #70-80 out of it. Making a few more changes to the fuel system should be a lot more capable and easier to work with and hopefully drop another 10-15#.
As of now were just waiting to get it down to eric at Mwc for some tweeks and the 8.50 cert.
Goals for this coming year :
8.xx
2900# rw
Lastly someone trade me a powerglide for my th400 thanks
Got my new super vic, 2" kooks, Leash electronics, made some lightweight door panels, removed all the stock wiring, and added a lightweight steering column from dmh. Switched out the sa qa1's for some strange da front coilovers, so far i took another #70-80 out of it. Making a few more changes to the fuel system should be a lot more capable and easier to work with and hopefully drop another 10-15#.
As of now were just waiting to get it down to eric at Mwc for some tweeks and the 8.50 cert.
Goals for this coming year :
8.xx
2900# rw
Lastly someone trade me a powerglide for my th400 thanks
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#35
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nick is a virgin in the transmission world... He just wants a glide because it weighs less, I don't think the car will go faster with it.. I'd much rather him invest in the new Reid or ATI 400 case, and make it a 2 speed 400...