Carter01 Moved on up today... Video inside!
#1
9 Second Club
Thread Starter
iTrader: (11)
Join Date: Oct 2007
Location: South Ga
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Carter01 Moved on up today... Video inside!
Alright folks here you go , a little long but so was the journey!
Thanks first, Christ my savior, Dave V., Cam H., Wayne G., Greg at FTI, Lorenz, Brett, JL, Brian J., and many more. (sorry if I forgot anyone)
Pass 1
New converter, going to 3825 on the TB, window switch set at 4k. I let off the TB, car falls on its face . I go back and check the log and then , DUH... car never saw 4k so it didn't spray, I thought something else was wrong
Pass 2
1.38 60ft
3.982 330
6.18 1/8
111.57 mph
8.086 1000ft
9.70 1/4
139.39 mph
So I was happy with a new PB but car spun. MPH was up over 2mph so power was promising!
Pass 3 (loosened up the front to full loose and pulled two degrees on the hit, Thanks Cam)
1.36 60ft
3.963 330
6.15 1/8
111.66 mph
8.063 1000ft
9.68 1/4
139.41 Mph
Pulled the plugs, running too lean so I remember what Dave told me a while back. Sometimes try adding fuel and if it picks up it wanted it, if it slows it didn't. So I went back and added some fuel. 48 jet, put in a 50 jet and left timing alone.
Pass 4
1.31 60ft I was sooooo excited about that!!!!
3.897 330
6.08 1/8 I was stoked to finally be in the 6.0 club
112.04 mph
7.985 1000ft
9.59 1/4
139.79 Mph
After the new best 60ft, 1/8 et and mph, 1/4 et and mph I swapped my tires back over, loaded up the car and drove her home! Better weather here we come!!!
Temp was 73
DA 1046
RW 3335
Thanks first, Christ my savior, Dave V., Cam H., Wayne G., Greg at FTI, Lorenz, Brett, JL, Brian J., and many more. (sorry if I forgot anyone)
Pass 1
New converter, going to 3825 on the TB, window switch set at 4k. I let off the TB, car falls on its face . I go back and check the log and then , DUH... car never saw 4k so it didn't spray, I thought something else was wrong
Pass 2
1.38 60ft
3.982 330
6.18 1/8
111.57 mph
8.086 1000ft
9.70 1/4
139.39 mph
So I was happy with a new PB but car spun. MPH was up over 2mph so power was promising!
Pass 3 (loosened up the front to full loose and pulled two degrees on the hit, Thanks Cam)
1.36 60ft
3.963 330
6.15 1/8
111.66 mph
8.063 1000ft
9.68 1/4
139.41 Mph
Pulled the plugs, running too lean so I remember what Dave told me a while back. Sometimes try adding fuel and if it picks up it wanted it, if it slows it didn't. So I went back and added some fuel. 48 jet, put in a 50 jet and left timing alone.
Pass 4
1.31 60ft I was sooooo excited about that!!!!
3.897 330
6.08 1/8 I was stoked to finally be in the 6.0 club
112.04 mph
7.985 1000ft
9.59 1/4
139.79 Mph
After the new best 60ft, 1/8 et and mph, 1/4 et and mph I swapped my tires back over, loaded up the car and drove her home! Better weather here we come!!!
Temp was 73
DA 1046
RW 3335
Last edited by Carter01; 12-01-2012 at 03:29 PM. Reason: added RW
#6
9 Second Club
Thread Starter
iTrader: (11)
Join Date: Oct 2007
Location: South Ga
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
@Zmg00camaross - Thanks man! Exhaust is super cheap. 2.5 pipe straight off the headers with bullets and dumps. Cheap but effective, sure beats having to swap exhaust like I used to.
Trending Topics
#8
9 Second Club
Thread Starter
iTrader: (11)
Join Date: Oct 2007
Location: South Ga
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Aaron!
Can't wait to see how she reacts with the new 225 As-cast heads from TSP. They look so lonely sitting on my kitchen floor! lol... Intake should be here in the next few weeks, heads going on, new dyno NA tune then track time in Jan! SBE record, BE WARE!!!!!!!
Can't wait to see how she reacts with the new 225 As-cast heads from TSP. They look so lonely sitting on my kitchen floor! lol... Intake should be here in the next few weeks, heads going on, new dyno NA tune then track time in Jan! SBE record, BE WARE!!!!!!!
#12
Thanks Aaron!
Can't wait to see how she reacts with the new 225 As-cast heads from TSP. They look so lonely sitting on my kitchen floor! lol... Intake should be here in the next few weeks, heads going on, new dyno NA tune then track time in Jan! SBE record, BE WARE!!!!!!!
Can't wait to see how she reacts with the new 225 As-cast heads from TSP. They look so lonely sitting on my kitchen floor! lol... Intake should be here in the next few weeks, heads going on, new dyno NA tune then track time in Jan! SBE record, BE WARE!!!!!!!
#20
9 Second Club
Thread Starter
iTrader: (11)
Join Date: Oct 2007
Location: South Ga
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the compliments guys, I'm not done until still she blows. The SBE record is sitting at a 9.34 so that is my obvious next goal however who knows, it might be lower before I get there. Either way I'm gonna keep trying new things to get faster. It sure would be nice to be at 3000 even or better