few nano kit questions
#41
#42
9 Second Club
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
After a lot of experience with NANO over the past 3 years I experienced a lot of the issues I see posted here. Seems to me one solution would be to have 2 NANO bottles, one calibrated higher for cold weather and one lower for hotter weather. I had 4 bottles re-calibrated to accomplish this and I'll report out on the results as the season gets going. In the end, if you are going to do 1-2 runs a night and are waiting in long lines, in my opinion, it is not worth it- just run a bottle warmer set-up. If you want to hot lap - nothing compares unless you have a bottle bath set-up. I've run 7-8 times a night on the NANO with no pressure drop. It's too bad NANO doesn't come up with adjustable pressure bottle - that would be the ultimate!
#43
9 Second Club/Nitrous Mod
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I told you Ebay, the classified section or Jegs clown! ![Thinker](https://ls1tech.com/forums/images/smilies2/thinker.gif)
Contrary to what nano says, I and others didn't have to up the fuel jet or decrease the nitrous jet.
I try to aim for 12.5-13.0 n/f, close to what it runs on motor. Enough timing pulled is the key and it'll go faster.![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
You have too much money, lol. I'd rather try what Tom @ Nano said by removing some washers to lower psi. The heck with getting another nano bottle for weather changes..
![Thinker](https://ls1tech.com/forums/images/smilies2/thinker.gif)
I try to aim for 12.5-13.0 n/f, close to what it runs on motor. Enough timing pulled is the key and it'll go faster.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
You have too much money, lol. I'd rather try what Tom @ Nano said by removing some washers to lower psi. The heck with getting another nano bottle for weather changes..
#44
9 Second Club
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I told you Ebay, the classified section or Jegs clown! ![Thinker](https://ls1tech.com/forums/images/smilies2/thinker.gif)
Contrary to what nano says, I and others didn't have to up the fuel jet or decrease the nitrous jet.
I try to aim for 12.5-13.0 n/f, close to what it runs on motor. Enough timing pulled is the key and it'll go faster.![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
You have too much money, lol. I'd rather try what Tom @ Nano said by removing some washers to lower psi. The heck with getting another nano bottle for weather changes..
![Thinker](https://ls1tech.com/forums/images/smilies2/thinker.gif)
Contrary to what nano says, I and others didn't have to up the fuel jet or decrease the nitrous jet.
I try to aim for 12.5-13.0 n/f, close to what it runs on motor. Enough timing pulled is the key and it'll go faster.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
You have too much money, lol. I'd rather try what Tom @ Nano said by removing some washers to lower psi. The heck with getting another nano bottle for weather changes..
#45
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You are clearly a big fan of it based on your experience, which is great if it worked for you. I, and a lot of other people have not had the same experience. I will gladly sell my Nano kit to someone if they want to give it a try as it is just collecting dust in my basement.
#48
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Went to the only shop in town with compressed air today and the owner said he "wasn't interested in filling it". He saw the NANO "Nitrous" sticker on the bottle and got scared. I assured him this wasn't a nitrous bottle and it was completely safe...still "not interested". Anyone ran into this issue? Should I cover up the Nitrous sticker so I don't scare the next potential filler??
#50
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That's what I was thinking! Made sure he heard me say "what a bussiness man".
Called a paintball shop today and spoke with the owner who was very interested in how the system worked. I explained everything and he gave me his personal cell to send a picture of the fill port just to make sure he could fill it. It's nice to run across a real businessman...too bad it's not in my town..
Called a paintball shop today and spoke with the owner who was very interested in how the system worked. I explained everything and he gave me his personal cell to send a picture of the fill port just to make sure he could fill it. It's nice to run across a real businessman...too bad it's not in my town..
#52
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
so I left it up to my girlfriend to swing by and get the bottled filled being that she was in that city(45 minutes away). turns out the fella rushed the fill to 3000psi which will soon drop when it cools. my question is.. can I run the system if it's not all the way at 3000psi? if not can't I just have him top if off next time I head that way?
#54
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Okay good deal..that's what I thought but wanted to be a 100%.
The pressure only ended up dropping to 2750.
How much is everything paying to get the 3000 tank filled? He charged my girl 20 bucks last night! Is this not excessively high?
The pressure only ended up dropping to 2750.
How much is everything paying to get the 3000 tank filled? He charged my girl 20 bucks last night! Is this not excessively high?
#56
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I told her to call me if it was anything over 10 so I could talk to them, but she didn't because she said he was a really nice guy and didn't want to seem like she was low balling him after all the help he gave her with directions and all...
Last edited by L$X$10; 05-03-2013 at 10:39 AM.