300 Wet shot?
Thread Starter
TECH Veteran
Joined: Aug 2002
Posts: 349
Likes: 0
300 Wet shot? I was thinking about getting the TNT F2 kit for doing this or upgrading my current NX Wet kit w/ GenX2 package to the MAF kit. I don't want a direct port kit due to price. Anyone have any suggestions?
"You'll poke your eye out kid!"
most nitrous people will tell you not to go over 200...250 at the very most through the intake. Chance of puddling is too great. Go direct port if you really want 300 hp. Use your GM MAF kit and dual stage it for 100 and 100...that should be pleanty. I am using a 175 shot jetted rich, and it hits pretty nice.
most nitrous people will tell you not to go over 200...250 at the very most through the intake. Chance of puddling is too great. Go direct port if you really want 300 hp. Use your GM MAF kit and dual stage it for 100 and 100...that should be pleanty. I am using a 175 shot jetted rich, and it hits pretty nice.
Originally Posted by SDB
"You'll poke your eye out kid!"
I personally would not do a 300 wet unless it was direcxt port. Give Nitro Dave a call...he has some good prices on NX direct port kits. The price may actually surprise you. Only a bit more than a complete TNT kit. I just got one
Trending Topics
Staging Lane
Joined: Jul 2004
Posts: 56
Likes: 0
From: Waco
Originally Posted by PlowTown Missile
Well, I'll give those guys a call and see how close the direct port kits are to the TNT F2 kit.
If you decide to do a direct port kit, gimme a call. Ill cut you a deal good enough on a NX kit you cant turn down. The F1 kit is capable of going 250hp itself with the recomended jets from TNT. We are working a deal for TNT direct port kits next week so be patient. You can convert your existing single nozzle kit to a direct port system but I dont know if it cost would be worth it, and the noids are only good for about 250hp 300 pushing it. Gimme a call, We take great pride in helping our fellow LS1tech guys.
Steve
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
12 Second Truck Club
iTrader: (1)
Joined: Jun 2004
Posts: 1,395
Likes: 0
From: The Chicken Ranch, California
Originally Posted by Friday13th
You could also contact Mike at Cold Fusion. I recently contatced him to order the extra parts that I needed to convert my kit to a DP. He has the best prices and gives great service.
Sorry, not trying to start a flame war, just an observation. 
Originally Posted by Steve@NitroDaves
If you decide to do a direct port kit, gimme a call. Ill cut you a deal good enough on a NX kit you cant turn down. The F1 kit is capable of going 250hp itself with the recomended jets from TNT. We are working a deal for TNT direct port kits next week so be patient. You can convert your existing single nozzle kit to a direct port system but I dont know if it cost would be worth it, and the noids are only good for about 250hp 300 pushing it. Gimme a call, We take great pride in helping our fellow LS1tech guys.
Steve
Steve
) but i want the TNT F4!!! 
Originally Posted by 1QWIKZ
special on TNT DP kits? please post when you are gonna run that sale. i will order mine then. as far as converting your F2, its gonna run a little less than a F4 kit. i have had the NX DP LT1/LS1 kit, but sent it back to get a TNT F2 kit(not a smart move on my part ) but i want the TNT F4!!!
) but i want the TNT F4!!!Dave
Wow I want to see the fireball and aftermath pics of the intake. Alos do you have stock internals? You don't have the funds for a fogger but you do have the funds for a new motor?