N20 question
#1
Staging Lane
Thread Starter
Join Date: Sep 2005
Location: The Woodlands, TX
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
N20 question
Well by next sunday ill have saved up enough after 4 weeks to buy an N20 kit. I am only going to be doing a 100 shot, and cannot afford a direct port setup. So i am wondering which will be better for me, i have an M6 and plan on installing heads/cam in the future. So which will be best for my needs and safer/more reliable wet or dry?
also which sponsors carry NX wet kits?
-thanks
also which sponsors carry NX wet kits?
-thanks
#3
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Not to be too much of a dick, but this has been beaten to the ground here. Do a search and you will find a lot of different answers to this question. My opinion: NX wet MAF or Single nozzle kit. As well as the basic, you want a heater, window switch, and NGK TR6 plugs. A walbro fuel pump and a fuel pressure switch will only make your system safer. Good luck with it.
#4
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Not to be too much of a dick, but this has been beaten to the ground here. Do a search and you will find a lot of different answers to this question. My opinion: NX wet MAF or Single nozzle kit. As well as the basic kit, you want a heater, window switch, and NGK TR6 plugs. A walbro fuel pump and a fuel pressure switch will only make your system safer. I know you say only a 100 shot, but you probably will change your mind and want to try a larger shot after some time, so all the extras will ensure you will be able to safely spray a 150 all the time. Good luck with it. Sorry bout the double post.
Trending Topics
#9