Pictures
#2
you could try this in the way of switch panals if you don't care about hideing it all you nedd is some black abs plastic and a couple aircraft style switches and your going to need a dremal. as for your purge either run it to the windsheild vents or out the front nostrals.
#6
12 Second Club
Join Date: Feb 2004
Location: Dallas, TX
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
when it comes time. im making a custom one for my ashtray. i really dont use it for anything, so im going to pull out the insert and make a panel. shut the door and no one will know
Trending Topics
#9
12 Second Club
Join Date: Apr 2005
Location: las cruces, new mexico
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
heres mine its the jimmy jams panel. mines not locked in place yet cause am still wiring but looks good. the cover closes with no problem. i also have my window switch mounted in the center consle.
#10
TECH Addict
iTrader: (10)
Join Date: Aug 2005
Location: Seminole County, Florida
Posts: 2,803
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by FLTransAm02
So who makes good looking switch panels for our Trans am's?
#11
LS1TECH Sponsor
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
http://www.dynotunenitrous.com/estor...p?idproduct=88
The DynoTune switch center is an option. You will need to make your own piece of aluminum plate... The beer plate is a great one as well! Hard to beat for the price.
Dan
The DynoTune switch center is an option. You will need to make your own piece of aluminum plate... The beer plate is a great one as well! Hard to beat for the price.
Dan
#13
TECH Apprentice
iTrader: (1)
Join Date: Oct 2003
Location: San Diego, CA
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DynotuneN2O
http://www.dynotunenitrous.com/estor...p?idproduct=88
The DynoTune switch center is an option. You will need to make your own piece of aluminum plate... The beer plate is a great one as well! Hard to beat for the price.
Dan
The DynoTune switch center is an option. You will need to make your own piece of aluminum plate... The beer plate is a great one as well! Hard to beat for the price.
Dan
#17
TECH Addict
iTrader: (21)
Join Date: Nov 2005
Location: Maine USA
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
WOW!
Thanks for the compliments
I have not made any F-Body panels yet, just need the dimensions and a straight on photo and can render some.
Most popular for the Vette seem to be Arm, Heater and Purge. Although I am starting to get those three plus a Opener Panel.
With this support from site venders I may just have to get into the Biz.
So far I have just done Vette stuff as a hobby.
Heres a link to my work if anyone is interested.
http://www.retrorelics.net/jim/n20_panel_design.htm
Thanks again Dean and Scott
Beer
Thanks for the compliments
I have not made any F-Body panels yet, just need the dimensions and a straight on photo and can render some.
Most popular for the Vette seem to be Arm, Heater and Purge. Although I am starting to get those three plus a Opener Panel.
With this support from site venders I may just have to get into the Biz.
So far I have just done Vette stuff as a hobby.
Heres a link to my work if anyone is interested.
http://www.retrorelics.net/jim/n20_panel_design.htm
Thanks again Dean and Scott
Beer