Robert,
See it never hurts to do your own research...

I know we do...


Now you will see.. Back to the beginning of this post where it was implied that our plate will not work on a ZO6.... It does.

Good job.
Dave

 

Did I imply that your plate wouldn't work? I didn't reread, but remember asking you directly, and also stating I will wait for Dave to chime in, but you went on the secrets tangent. The difference between you and I is the fact I'll share any info I gleen, gladly. Also, I didn't state our new ls1 plate would work, because I wasn't sure of things, so we all have learned something here. I am not on the engineering end of things, so this is why I was asking you and Ricky both, as I had never heard it stated that these were for the Z06.
Robert

 

Quit splitting hairs Robert The only thing thats counts AFAIK is the intake opening. The plate has to match that and the back of the TB.

I think Dave answered the question that he had a plate for a Z06 that fit. I wouldnt expect him to give you, who is a competeing vendor, all his info on his plate kits when you guys have plate kits as well. Even though the info is simple and well known.

Your gonna go bald if you keep stressing

 

Perfect kit for the zo6, 20110-10.
Ricky

 

Splitting hairs, ouch, I don't have enough hairs as it is. Yes, I reread, and Dave did say it will fit the Z06. This still does not void the fact that the Z06 runs a 80mm TB and MAF, which most of the posters did not realize. So I am happy that I got the info on both accounts out to the end user, and that was the only reason for questioning, info. Am I splitting hairs again?. Watch for the Nitrous Direct/Cold Fusion plate, as it will be the trickest set-up going, and will be my personal choice, know that I know the ls1/ls6 intake both have a 75mm opening.
Robert
Robert