Pics need ASAP!
Pics need ASAP! Im looking for some pictures of a LT1 with a simple nitrous set up, just a wet shot. I need to see where the solineods should be placed and what was used, because i have a kit and im not sure how i want to set it up. It needs to be very simple. Please hook me up with some pics, Thanks alot
i like the simplicity, how did u mount the brackets, because i only have 2 of them a nitrous and a fuel solenoids, obviosly but how did u mount them that way. Also how much do those two braided lines cost?
yeah but when i took it off, i found out that it wasnt holding right and my solinoeds were dangling because of the fuel and nitrous tubing that i got with my kit, i need to get some braided cord.
I just bent the NX brackets and mounted them using the bolts that hold the fuel rails down. The braided line canme with the kit but I did upgrade to the show line on the N2O side (around $21)
Trending Topics
Thanks everyone, thats actually an old picture, it looks even better now with Dave's shiny stand alone and new CAI!!
It would look even better with a direct port! (Damn I hate being poor)
It would look even better with a direct port! (Damn I hate being poor)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo When I was running the nozzle I had it Where your I.A.T. would go, I had a relocation harness for it.
Yo what it as straight as possible facing the intake. Also make sure it doesn't interfere with the hood.
Yo what it as straight as possible facing the intake. Also make sure it doesn't interfere with the hood.
The top picture is when I had the 1LE elbow the second where the red circle is where your I.A.T. would go I put the nozzle there becuase I didn't want to drill the Tricky flow elbow. Hope this helps.
30thz did u need 4 sets of lines, the lines to the solinoeds then from the solinoeds to the jet? i only have 1 feed line, from the bottle, where does that go? do i need another line for the other solinoeds
yeah one quick question, where did u get the fuel supply from, i kno the fuel line. but where at and how did u do it.. Thanks 30thz youve been alot of help so far