Wetshot nozzle placement on LT1??
Damn how many times are we going to ask this question? You are like the third one this month. Use the search button.
https://ls1tech.com/forums/nitrous-oxide/477610-pics-need-asap.html
https://ls1tech.com/forums/nitrous-oxide/477610-pics-need-asap.html
Darrell, thats a nice looking nozzle install. I did a single on a friends LT1 a couple yrs ago, I ended up placing the single nozzle on the outside bend, it was rubber/silicone which allows it to flex a little. On the inside curve it would pull it and make the pattern spray against the inner wall instead of down her throat. I like your layout there, good job.
Charlie
Charlie
10 Second Club
Joined: Apr 2005
Posts: 685
Likes: 0
From: Clarksville, IN
Thank's Charlie. I tried to get the straightest shot possible to the TB.
Camaro94SS, I am unaware of a specific distance recommended from the TB. Mine is about 4 in. from the throttle blades. That is about as far back as you can go on that elbow and keep the nozzels aimed straight into the TB.
Camaro94SS, I am unaware of a specific distance recommended from the TB. Mine is about 4 in. from the throttle blades. That is about as far back as you can go on that elbow and keep the nozzels aimed straight into the TB.
Originally Posted by n2ocamaro
Thank's Charlie. I tried to get the straightest shot possible to the TB.
Camaro94SS, I am unaware of a specific distance recommended from the TB. Mine is about 4 in. from the throttle blades. That is about as far back as you can go on that elbow and keep the nozzels aimed straight into the TB.
Camaro94SS, I am unaware of a specific distance recommended from the TB. Mine is about 4 in. from the throttle blades. That is about as far back as you can go on that elbow and keep the nozzels aimed straight into the TB.
I placed them both on the outside of the bend. I had to tap both in on the bend which was a little difficult. I have both shooting right into the middle of the throttle body. Sorry, I don't have pics. KR went away and the #1 and #2 plugs now look fine.
Trending Topics
10 Second Club
Joined: Apr 2005
Posts: 685
Likes: 0
From: Clarksville, IN
The Vortec elbow has the divider which doesn't allow for both nozzels to be on one side. I think it would be a real pain to try to cut out the divider. Since you are using NX nozzels, I wonder if they have a straighter (tighter) spray pattern than the TNT nozzels. I will have to test the spray pattern with the elbow off the TB to see what it does. Thanks for the heads up.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
