who has used the new nos ls2 kit what do you think

 

Pm 1MEANGTO he has a Cold Fsuion LS2 Plate kit from us, and he loves it! If you have any questions let us know

LS2 Nitrous Kit

Check out the link above

 

I had the kit never installed it. I sent it back i was not impressed with the size of the solenoids. Or the looks of the kit in general.

And then I ordered the cold fusin kit. I am now waiting for the ls1 plate for my car since the ls2 plate works so good.

 

http://www.nitrousdirect.com/nitrous_gallery/index.php

Those are some pics of my setup.

 

We carry the NOS plate system. Some of the other systems on the market are very similiar if not the same as there design.

We also carry our plate system. I personally feel there is not another plate on the market that measures up to our LS2 plate. Do a search here in the nitrous forum there are tons of post and a video on how ours works. If I can help in any way let me know.
Thanks
Dave

 

The nos plate that I had from summit looked nothing like cf's plate.

Or maybe your saying yours is a rip off?

 

Also keep in mind Cold Fusion as far as I know is the only one offering an awesome 2 stage plate kit capable of up to 500 HP!

You'll have to weed through hype and nonsense on the site sometimes, i'm sure you'll make your own intelligent choice, just do your homework and ask questions

 

WE have offered Dual stage plates from the begging. So we have the dual stage in a Nitrous outlet desighn also. You can also fine this with in your search. Of course in todays modern technology most guys that are actually spraying a large enough shot to use a dual stage are single staging it with a good controller.

Dave

 

IF you're looking at serious power dual stage is the way to go, the single stage is sweet too ask 1MEANGTO the name is very suiting. quality and price are very important as well as customer service and support, shop around for sure. We'll be happy to help you

 

It actually should be 2meangto's now though.

 

Check out the Nitrous Gallery thread for some additional pics.
Robert

 

what do you think of the nx ls2 nos ls2 or any other pros and cons need ad vice

 

I have both NX and Cold fusion. Had no problems with either of them. But the cf kit does hit harder shot for shot.

 

NX does not offer a plate system for the ls1.

Check into our plate system. There is not another plate system on the market that can compare to ours.
Dave

 

As long as you close your eyes you can't compare any.. lol

Like I said if you want a quality plate without the hype and nonsense, and the ONLY 2 stage plate kit, then you'll want to check out the Cold Fusion Plate kit.

 

We released a dual stage plate the same time we released the single stage plate. We were the first ones to release a dual stage plate for the LS1.

You can find it here on our site.(I did just notice the picture was wrong lol)
http://www.nitrousoutlet.com/catalog...roduct_id=1137

Here is a picture of a dual stage plate with our design and thought out machining process with o-ring style gaskets machined into the plate instead of paper gaskets and the best desgned discharge possible.

http://www.nitrousoutlet.com/catalog...roduct_id=1137


I would hope that the fact that we actually did all of our own research and development to give the best plate design in the discharge and the way it bolts on and seals is not to be hype. It did take us a year to come up with it.
Ofcourse it would have been easier to just wait until someone else built one and then basically copy it but we do not do things that way. We try to set the industry standard and fill we are doing a good job at it.

Now that we see that Nitrous Outlet offers both a single stage and a dual stage plate let me explain why we do not just offer one plate.

Because of the way our plate is designed with multiple discharges (for the best attomization) we place the inlet fittings in a certain spot. As always we always want the customer to have the cleanest looking install possible also.

In most cases the average person does not need a dual stage system. It is an over sale and extra cost not needed. So we decided that the best thing to do would be two offer two different kits so that the guy only needing to run a single stage can still have a clean looking plate with out offset fittings or caped off unused fittings.

By seperating the two plates it obviously cost us two different builds between the two. But I feel we have a system to suite both customers needs with a clean looking install from the best desighned plate on the market with only the best quality parts and machining desighns possible.
Dave

 

Pretty sure this is an LS2 thread? Atleast this is entertaining

 

Sorry.
I posted the wrong ones. We also offer the 90mm/LS2 in a dual stage.
Dave

 

Ahh ok my bad I thought I had read that you did not have an Dual stage LS2 plate made just for LS2.. sorry :/ my bad

 

If you take the time to look at our single/dual stage plates, you'll see that they are two different animals, and two different kits with different prices. No plugged ports as you imply. Now what seperates our plate is the fact that all the single stage plates can be sent back for machining and upgrading to dual stage at a later date if needed/wanted. Nitrous Direct/Cold Fusion spent the same time and effort on designing/producing their plates as you claim you did, and copied no one as you continue to imply. Actually the side exit of the braided lines is much cleaner/tricker, imo. We put the mondo 400hp Pro noids in our kits also. No better quality in the nitrous industry period, bar none.
Robert