Problems with tnt power ring?

Reply Subscribe

Thread Tools

Search this Thread

Jun 9, 2006 | 09:54 PM

Jake the SSnake

Thread Starter

TECH Enthusiast

iTrader: (11)

Joined: Dec 2002

Posts: 529

Likes: 1

From: Iowa

Problems with tnt power ring?

I have seen lots of people have problems fitting the power ring over the past couple of years,myself included so I decided to post my fix for it.I just took my maf apart and took it to a machine shop and had them drill and tap it for the nozzles after locating a good position for fitment and even distribution.I've had it like this for 2 years w/out a problem.The nozzles were placed as close to the center as possible then my bellow was notched for the nozzles and it all fits together perfectly.I was just wondering why more people don't do this?

Jun 9, 2006 | 09:57 PM

99FormulaM6

TECH Junkie

iTrader: (21)

Joined: Aug 2004

Posts: 3,162

Likes: 0

From: Virginia Beach, VA

mine was a bitch to get fitted. but, once i trimmed the fernco down to the right size it all went together.

Jun 9, 2006 | 10:43 PM

Reject

TECH Senior Member

iTrader: (24)

Joined: Apr 2005

Posts: 9,195

Likes: 4

From: Texas

that's a pretty clean alternative!

Jun 10, 2006 | 12:25 AM

silver02ws6

12 Second Club

iTrader: (2)

Joined: Oct 2002

Posts: 221

Likes: 0

From: FL

I trimmed my radiator shroud and it seems to fit just fine. Need to get the system wired and bottle mounted now so i can spray this thing.

Jun 10, 2006 | 09:01 AM

Benjamin Russick

TECH Fanatic

iTrader: (1)

Joined: Nov 2001

Posts: 1,493

Likes: 0

From: Chesapeake, VA

I have the newer Power-ring (slight improvement over the "old" one) and it took me some time to get everything fitted together. Now it looks great and puts down serious power. Your MAF install looks clean, tho...