Purge Vid
Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
Purge Vid http://videos.streetfire.net/video/9...4e22770bbc.htm
I can't decide if I wanna keep it there or move it to the windshield cowl. Opinions?
I can't decide if I wanna keep it there or move it to the windshield cowl. Opinions?
Trending Topics
i don't see how where it is can be good at all...i mean how can you see when the line is purged??? The whole point of purging is to know the n20 is up to the solenoid...IMO, move it so you can see it
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
Originally Posted by REDHOtTransAM
i don't see how where it is can be good at all...i mean how can you see when the line is purged??? The whole point of purging is to know the n20 is up to the solenoid...IMO, move it so you can see it
sorry for the bad pic
Originally Posted by Brian2006
With that setup I could defintely see it. Since I had only used brake lines because of the short distance for the purge to travel, it was a much better shot. In that video I think I was at 500 psi. Anyways I ended up moving it:
sorry for the bad pic
sorry for the bad pic
Looks like my purge.
Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
Since the thread was brought back from the dead, I have a 3" sunoco hood that will be painted in 3 weeks:
And here is one installed on Xtinctz28's car:
Should I move the purge more to the center or possibly angle it differently?
And here is one installed on Xtinctz28's car:
Should I move the purge more to the center or possibly angle it differently?
Originally Posted by Brian2006
With that setup I could defintely see it. Since I had only used brake lines because of the short distance for the purge to travel, it was a much better shot. In that video I think I was at 500 psi. Anyways I ended up moving it:
sorry for the bad pic
sorry for the bad pic
Dave
Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
Originally Posted by Nitro Dave's Nitrous Outlet
What purge is that. Is it our BIG SHOW?
Dave
Dave
No but that is on my purchase list
It's just a normal NOS 5177 kit with rubber hose lines to the cowl 
