I Was Wondering If You Guys That Have The Bottle Mounted In Between The Rear Seats Are Passing Tech At Your Local Street Legal Dragstrip,what Are You Guys Doing With The Blowdown Tube If Your Passing It.i Want To Put Mine There But I Want To Pass Tech Inspections When I Go.

 

get the blowdown tube kit from nitro dave and run it out through the grommet under the rear passenger seat...or you can make one yourself

 

That's why the bottle sits in the trunk during tech

 

I just put an extra bend in my blow down tube for it to meet up with the tranny tunnell

 

that works also

 

i put a bag over mine and osw doesnt know the difference

 

I Have The Blowdown Tube What Do I Need To Make That Work Some Kind Of Hose Line How Do I Get It On The Blowdown Tube.

 

I just got tygon tubing from Home Depot

 

dose anyone have a pic of it exiting under the rear seat?

 

Yeah,that Would Be Great,tygon Tubeing And How Did You Get It On The Blowdown Tube Any Pictures You Can Post.

 

This kit is perfect for what you are doing.
http://www.nitrousoutlet.com/catalog...roduct_id=1116

 

thanks dave.

 

Ill Keep That In Mind Thanks

 

I just double hose clamped a piece of hose to the end of the blowoff tube and ran it under the pass. side rear seat. You cant see the hose clamps because there along side the seat.

 

8an line works and just run it out under the seat.

 

yeah i would like a pic too please

 

Correct.But.... In order to be safe it really needs to connect to a bulk head atached to the car. This way if the burst disk was to pop at 3000 psi the hose does not become a hazard whipping around through the air..

That is alot of pressure...
Dave

 

http://memimage.cardomain.net/member...10_59_full.jpg

Mounted behind passenger seat... there is a grommet perfectly lined up to allow the blowdown tube to pass through.

 

My idea was to zip tie it to the sub frame connecters probably not the best idea ever but cheap.

 

I just drilled a hole. I can plug it if I ever want to take it out.