Why do all you guy and gals keep filling your bottles?
#142
Last time i was in florida i pick up a performance mag cant remember which one though. there was a nitrous wright up "425 hp hit will it last" ? they purged the system below 3k which blew piston chunks? I believe it was last hit with a 325 or 350 shot. Im curious if the 425 hit would have worked out??? maybe a 500hit too???
You know I got a stock small block laying around.
I wounder?????
You know I got a stock small block laying around.
I wounder?????
#143
TECH Senior Member
iTrader: (2)
Originally Posted by BADSZ28
Are those fittings swivels? How much? Do you have something cheaper? I don't need anything fancy, just needs to work and not leak. Well at least I have the sizes. I will try home depot or something too. I do have the NOS 15lb bottle. Not sure how old though. It was from a 5177 kit so no older than 98-99 is my guess.
Robert
#144
Originally Posted by jester1
Last time i was in florida i pick up a performance mag cant remember which one though. there was a nitrous wright up "425 hp hit will it last" ? they purged the system below 3k which blew piston chunks? I believe it was last hit with a 325 or 350 shot. Im curious if the 425 hit would have worked out??? maybe a 500hit too???
You know I got a stock small block laying around.
I wounder?????
You know I got a stock small block laying around.
I wounder?????
I think for anything below 700rwhp, nitrous is just too easy. Anything above, a turbo is your best bet.
#145
TECH Fanatic
iTrader: (17)
Join Date: Sep 2006
Location: dayton ohio
Posts: 1,638
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by turbo'd stang
I've got a 400 shot on my car...two stages, 250/150. It's a stock bottom end, with a cam/GMPP intake/plate kit. I haven't hit both together yet...it already makes 730rwhp on the 250 shot and that is through a PG. I'm taking it to the track tonight to see how it does on that stage. When my other motor is ready...which should be a few weeks, I'm going to hit both and see what lands where..lol
I think for anything below 700rwhp, nitrous is just too easy. Anything above, a turbo is your best bet.
I think for anything below 700rwhp, nitrous is just too easy. Anything above, a turbo is your best bet.
#147
Fist off, what the hell, the track tonight???? Must be nice, eh. I'm waxing the shovles and getting the salt ready.
Its probably too late but what they say VIDEO~!!!!!!!
What kit are you using? Isthat on an ls1 or oldschool sbc?
good luck and have fun, dont forget report back please love to know how it went.
Its probably too late but what they say VIDEO~!!!!!!!
What kit are you using? Isthat on an ls1 or oldschool sbc?
good luck and have fun, dont forget report back please love to know how it went.
#148
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by N2O-ARMD
I help run a pro mod, for the last three years we have been runnig a SBC 427 cu/in single turbo I just got done figuring up the cost of the car to build the motor, start to finish. Was $28,000.00 the whole turbo set up I mean everything (PMC, intercooler, headers, turbo, pipeing). It totaled up at $21,000.00 for that alone.
So in sum your talking about $49,000.00 for a turbo motor. To be able to run with the pro mods. Obviously your not going to spend that kind of money on a street car.
Now we just sold our other car which was a n/a SBC single stage N2O 481 cu/in motor
we set two national records with this car.
1st it was the worlds quickest n/a SBC at the sum of 6.666 @ 211mph
2nd it was a street car licened and inspected and it ran those kind of numbers. ( It is a chassis car) but still a street car.
The motor cost appox. the same as the other but the fogger was only $1000.00.
Now the turbo car has gone 6.35 @ 227mph but it took us three years to get there. The nitrous car would have run those kind of numbers off the trailer 1st day out.
If I were to do it all over again I would put a nitrous set up back on the car.
YOU CAN NOT BEAT NITROUS DOALLAR FOR DOLLAR TO ANY OTHER POWER ADDER.
So in sum your talking about $49,000.00 for a turbo motor. To be able to run with the pro mods. Obviously your not going to spend that kind of money on a street car.
Now we just sold our other car which was a n/a SBC single stage N2O 481 cu/in motor
we set two national records with this car.
1st it was the worlds quickest n/a SBC at the sum of 6.666 @ 211mph
2nd it was a street car licened and inspected and it ran those kind of numbers. ( It is a chassis car) but still a street car.
The motor cost appox. the same as the other but the fogger was only $1000.00.
Now the turbo car has gone 6.35 @ 227mph but it took us three years to get there. The nitrous car would have run those kind of numbers off the trailer 1st day out.
If I were to do it all over again I would put a nitrous set up back on the car.
YOU CAN NOT BEAT NITROUS DOALLAR FOR DOLLAR TO ANY OTHER POWER ADDER.
Is it a NA Engine or a Nitrous Engine? Now we just sold our other car which was a n/a SBC single stage N2O 481 cu/in motor
Ditto, was this NA or Nitrous? NA does not = Nitrous Assisted! 1st it was the worlds quickest n/a SBC at the sum of 6.666 @ 211mph
#149
12 Second Club
iTrader: (33)
Join Date: Jan 2005
Location: winter springs, fl
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
just using round numbers, a bolt on turbo kit will run about 5 grand (not counting supporting mods) and a wet kit around 500 (also not supporting mods) itll take...150 10lb bottles to breka even, not to mention the tq...
#150
TECH Senior Member
iTrader: (2)
Originally Posted by Hennytime
just using round numbers, a bolt on turbo kit will run about 5 grand (not counting supporting mods) and a wet kit around 500 (also not supporting mods) itll take...150 10lb bottles to breka even, not to mention the tq...
Robert
#153
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jester1
hahahahahahahaaaaaaaaaaaaaa
on another note, A few anoynomus birds told me to stay away form cold fusion nitrous systems as they are garbage!!!
on another note, A few anoynomus birds told me to stay away form cold fusion nitrous systems as they are garbage!!!
#154
11 Second Club
iTrader: (13)
Join Date: Oct 2003
Location: apoopka, fl
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
i personally had very bad luck with CFN.. and when i asked for help they basically told me no.. so the solenoids have since become an ornament on a RC boat.. which then sank.. I will tell you though.. this was almost 2.5 yrs ago.. just the experience was really bad and i won't go back..
Mike
Mike
#155
12 Second Club
iTrader: (33)
Join Date: Jan 2005
Location: winter springs, fl
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Robert56@NitrousDirect
I don't know, but it seems pretty common for the vette guys to have 20k plus into their turbo set-ups? Might be cheaper for the f-bods, as the vette tax is a killer.
Robert
Robert
#156
I went out last night, got in the water box...doing my burnout. I was just getting ready to shift into second and motor started to bog and died. I tried to restart it and all it does is click. She locked up on me..lol. I'm guessing something in the lowerend tried to save itself..lol. Funny thing though, it never knocked once.
This was an LS1 motor.
This was an LS1 motor.
#159
TECH Senior Member
iTrader: (2)
Originally Posted by jester1
hahahahahahahaaaaaaaaaaaaaa
on another note, A few anoynomus birds told me to stay away form cold fusion nitrous systems as they are garbage!!!
on another note, A few anoynomus birds told me to stay away form cold fusion nitrous systems as they are garbage!!!
Robert
#160
TECH Senior Member
iTrader: (2)
Originally Posted by blacktransam
i personally had very bad luck with CFN.. and when i asked for help they basically told me no.. so the solenoids have since become an ornament on a RC boat.. which then sank.. I will tell you though.. this was almost 2.5 yrs ago.. just the experience was really bad and i won't go back..
Mike
Mike
Robert