LT1 Solenoid Brackets
03-20-2007, 10:00 AM
#1
Guest
Posts: n/a
LT1 Solenoid Brackets Ok Guys we have two designs for you to choose from.
This solenoid bracket will mount off the top of the throttle body bolts. This unit will clear a stock hood with a little " finesse " you will have to either bend the bracket a little or clearence the hood bracing.
This solenoid bracket will bolt down using the front two fuel rail bolts.
If you are using a purge port design solenoid the bracket has enough room to mount the purge and gives enough room for the fuel and purge hook ups.Both units are instock and are ready to ship. They are currently not on the website but will be on there shortly. You can call you order in
( 1-866-648-7637 )
Thanks
-Chris
This solenoid bracket will mount off the top of the throttle body bolts. This unit will clear a stock hood with a little " finesse " you will have to either bend the bracket a little or clearence the hood bracing.
This solenoid bracket will bolt down using the front two fuel rail bolts.
If you are using a purge port design solenoid the bracket has enough room to mount the purge and gives enough room for the fuel and purge hook ups.Both units are instock and are ready to ship. They are currently not on the website but will be on there shortly. You can call you order in
( 1-866-648-7637 )
Thanks
-Chris
Last edited by Chris@NitroDaves; 03-20-2007 at 10:13 AM.
03-25-2007, 02:26 AM
#6
Guest
Posts: n/a
03-25-2007, 08:47 AM
#7
Launching!
iTrader: (5)
Join Date: Feb 2004
Location: Kingsport, TN
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Good price, need to order a couple more things from you all in the near future. One question though.
How in the hell does the purge solenoid fit in between there and one still retain access to the inside port on the fuel noid? It doesn't look like it can be done without a 90* fitting coming off the inside of the fuel noid.
This is gonna look great with my new LT1 plate from you all.
How in the hell does the purge solenoid fit in between there and one still retain access to the inside port on the fuel noid? It doesn't look like it can be done without a 90* fitting coming off the inside of the fuel noid.
This is gonna look great with my new LT1 plate from you all.
