I ordered a shorter fuel line, but ordered a blue fitting line instead of a red fitting.

Here's how it looked before.




Here's my setup after I tried to clean it up a bit.




How can I make this look cleaner? Solenoid position, line position, line coverings, etc. I need your guys' help!

Thanks,
Shane

 

all depends on what you like

I have the noide at the back of the engine, behind/under the frc's
here's mine: http://nitrousoutlet.com/customerCars/details.asp?id=44

 

you can order a fitting to mount the fuel solenoid directly on the fuel rail if you have the space

 

LOL this is hard to explain with out showing but ill try. Put noids directly across from each other, Use string to find out the correct lenght of lines so you dont have to route them behinde and under **** just make them equal. Wire loom the feed line hide it cut loom so that both feed lines seem equal. Loom the purge line hide it. Make sence????? Oh and flip the fuel noid around and get new sticker.

 

Yeah, I was thinking about how to go about looming the wires. It's a good idea to flip the fuel noid around. I'll draw or ps some things and post them up. How do I go about disconnecting the fuel line w/o having fuel go all over?

 

Mine didnt leak to much when I took all my **** off just put a cup under you rail no big deal.

 

 

not the best work but you get the idea move your n20 noids to the circle. feed line is the blue line loom it. just thought it might give you some idea.

 

That is a good idea. I'll try it and see what I can do. Thanks man. Otherwise I might get a noid plate mount and still loom them.

 

Start by cleaning your engine bay in general... armor all that **** or something, looks real dirty

 

Yeah, yeah, I'm getting the car fully detailed within the next 2 weeks.

 

Just do a search for install pics it will help you out ALOT by looking at them. Mainly lines same length and not in a birds nest wrapped around **** and hide the feed line.