Won't Spray
Won't Spray Can't seem to get this NO2 kit working.... 
My window switch is a Nitrous Daves stage 2 (thought it was a dynotune) and I think it's what's keeping the No2 from spraying. When I have the nitrous/window switch On it says 0L0
In run mode, the LEDs (A.B.C.)will show the unit’s status.
A = throttle position activation switch status [0 = OFF / 1 = ON]
B = gear lock out for channel 1 [0 = feature OFF / L = locked out]
C = gear lock out for channel 2 [0 = feature OFF / L = locked out]
That means my TPAS is off
I'm locked out of stage 1
and stage 2 is off .................is that right? Should it be different?
The purge works, as well as the bottle heater. When I go wot nothing happens. ? Help
My window switch is a Nitrous Daves stage 2 (thought it was a dynotune) and I think it's what's keeping the No2 from spraying. When I have the nitrous/window switch On it says 0L0
In run mode, the LEDs (A.B.C.)will show the unit’s status.
A = throttle position activation switch status [0 = OFF / 1 = ON]
B = gear lock out for channel 1 [0 = feature OFF / L = locked out]
C = gear lock out for channel 2 [0 = feature OFF / L = locked out]
That means my TPAS is off
I'm locked out of stage 1
and stage 2 is off .................is that right? Should it be different?
The purge works, as well as the bottle heater. When I go wot nothing happens. ? Help
Should read 100 for a regular single stage shot.
Are you getting a RPM reading??
Are you using the TPS for your WOT switch??
Are you tapped into the blue wire at the TPS??
Did you setup the TPS reading on the window switch??
Theres to many variables that could be causing it not to spray.
If you can just list how you have everything setup and how you have each step setup.
Then I can tell you whats wrong.
Are you getting a RPM reading??
Are you using the TPS for your WOT switch??
Are you tapped into the blue wire at the TPS??
Did you setup the TPS reading on the window switch??
Theres to many variables that could be causing it not to spray.
If you can just list how you have everything setup and how you have each step setup.
Then I can tell you whats wrong.
Originally Posted by 85mudblazin
Should read 100 for a regular single stage shot.
Are you getting a RPM reading??
Are you using the TPS for your WOT switch??
Are you tapped into the blue wire at the TPS??
Did you setup the TPS reading on the window switch??
Theres to many variables that could be causing it not to spray.
If you can just list how you have everything setup and how you have each step setup.
Then I can tell you whats wrong.
Are you getting a RPM reading??
Are you using the TPS for your WOT switch??
Are you tapped into the blue wire at the TPS??
Did you setup the TPS reading on the window switch??
Theres to many variables that could be causing it not to spray.
If you can just list how you have everything setup and how you have each step setup.
Then I can tell you whats wrong.
I have the blue wire spliced into the tps (passanger side under TB).
In step 7 of programming it asks which TPAS mode...I put 002=TPS signal to pcm.
Otherwise I have stage one to come on @ 3000 rpm's and to quit @ 6000 rpm's with first gear locked out.
Something in the window switch setup...it sounds like you locked out the first stage and unless you are running a dual stage it won't be activating. I have to ask, but are you trying it in a gear besides 1st since you have it locked as well?
Give Nitrous Outlet a call or keep messing with...it'll start working.
Give Nitrous Outlet a call or keep messing with...it'll start working.
Originally Posted by 99Silverado5.3
Something in the window switch setup...it sounds like you locked out the first stage and unless you are running a dual stage it won't be activating. I have to ask, but are you trying it in a gear besides 1st since you have it locked as well?
Give Nitrous Outlet a call or keep messing with...it'll start working.
Give Nitrous Outlet a call or keep messing with...it'll start working.
Trending Topics
Guest
Posts: n/a
Call me...
if it is reading RPM and TPS properly...make sure you are passing the off RPM to deactivate the gear lockout.
Wrong
3000rpm on 6200rpm off, set to lock out 1 gear
6000rpm shift point
Right
3000rpm on, 5900rpm off
6000rpm shift point
the car will not spray unless you pass the off RPM
if it is reading RPM and TPS properly...make sure you are passing the off RPM to deactivate the gear lockout.
Wrong
3000rpm on 6200rpm off, set to lock out 1 gear
6000rpm shift point
Right
3000rpm on, 5900rpm off
6000rpm shift point
the car will not spray unless you pass the off RPM
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Ray@Nitrous Outlet
Call me...
if it is reading RPM and TPS properly...make sure you are passing the off RPM to deactivate the gear lockout.
Wrong
3000rpm on 6200rpm off, set to lock out 1 gear
6000rpm shift point
Right
3000rpm on, 5900rpm off
6000rpm shift point
the car will not spray unless you pass the off RPM
if it is reading RPM and TPS properly...make sure you are passing the off RPM to deactivate the gear lockout.
Wrong
3000rpm on 6200rpm off, set to lock out 1 gear
6000rpm shift point
Right
3000rpm on, 5900rpm off
6000rpm shift point
the car will not spray unless you pass the off RPM